All Things Mk5 > How to Guides / Troubleshooting
***HOW-TO INSIDE*** Replacing oil pick up pipe - Intermittent low oil pressure
rich83:
Just to add to this guide. The tool you need to get to the three f*cking bolts is a 5mm ball headed hex. At least 100mm long and 3/8" drive. You'll struggle with a regular 5mm ball headed Allen key
dazza:
--- Quote from: rich83 on September 30, 2015, 01:14:35 pm ---Just to add to this guide. The tool you need to get to the three f*cking bolts is a 5mm ball headed hex. At least 100mm long and 3/8" drive. You'll struggle with a regular 5mm ball headed Allen key
--- End quote ---
I did manage with a regular ball headed allen key but i think i was just lucky. Did you get the sump off?
rich83:
Yes. Pita. Rounded one bolt nearly. Need to have the right tools
dazza:
--- Quote from: rich83 on September 30, 2015, 07:30:30 pm ---Yes. Pita. Rounded one bolt nearly. Need to have the right tools
--- End quote ---
The good thing about these is you can use an allan or socket. Was the pipe clogged?
rich83:
You can only use a socket on some of them. The twat bolts need and Allen. The pick up was annoyingly clean.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version