All Things Mk5 > Mk5 General Area

Got a fuel pump, updated with fitting pics

<< < (5/7) > >>

Hurdy:
Naaaaaaa,

I just know you'll not be able to resist giving it some stick now you have the power :wink:

gazbutS3:
I'm a reformed character since the bump, steady all the time :smiley:

Hurdy:

--- Quote from: gazbutS3 on August 14, 2009, 11:32:58 pm ---I'm a reformed character since the bump, steady all the time :smiley:

--- End quote ---
                                                                      ^^^
I thought that would have been a wink and not a smile :rolleye:

gazbutS3:
ok fitted the pump yesterday, quite an easy job, took about an hour, but I was in no rush



first you need to remove the engine cover, we all no what a pain in the @rse that can be, just give it a sharp tug :smiley:





then you'll see the pump on the righthand end of the engine



make sure you release the fuel pressure from the schrader valve

gazbutS3:
continued :smiley:



disconnect the inlet and out let underneath, then disconnect the 2 electrical plugs and the remove the 3 bolts holding the pump to the engine and remove the pump



I got a replacement cam follower bucket as I thought I'd change it while it was in bits but as you can see from the pictures there was no signs of wear at all, the old 1 is on the left this is 14000miles old



fitting is the reverse of removal,  make sure you put a touch of moly grease on the cam side of the follower to help bedding in



New pump fitted, The pump comes with full instructions and is fairly straightforward, thanx for looking

Navigation

[0] Message Index

[#] Next page

[*] Previous page