Intake Manifold Runner Control

All Things Mk5 > How to Guides / Troubleshooting

(1/4) > >>

scopes:
some new faults, anyone point me in the right direction to getting them fixed,,, the intake runner fault was coming now and again, now this?

Wednesday,07,August,2013,03:59:19:05378
VCDS Version: Release 11.11.6 (x64)
Data version: 20121223

   Address 01: Engine Labels: 06F-907-115-AXX.LBL
Control Module Part Number: 1K0 907 115 J HW: 1K0 907 115 F
  Component and/or Version: 2.0l R4/4V TFSI 0030
   Software Coding: 0403000318070060
   Work Shop Code: WSC 00191 264 15243
   VCID: 2D555FF0B4043C70BBD
2 Faults Found:

012691 - Intake Manifold Runner Control
   P3193 - 002 - Open Stop outside of Valid Range
   Freeze Frame:
   Fault Status: 01100010
   Fault Priority: 0
   Fault Frequency: 1
   Mileage: 139458 km
   Time Indication: 0
   Date: 2000.00.00
   Time: 03:57:58

   Freeze Frame:
   RPM: 0 /min
   Load: 0.0 %
   Speed: 0.0 km/h
   Temperature: 84.0°C
   Temperature: 42.0°C
   Absolute Pres.: 990.0 mbar
   Voltage: 12.573 V

004248 - Intake Manifold Tuning Valve Position Sensor (G336)
   P1098 - 001 - Open or Short to Plus
   Freeze Frame:
   Fault Status: 01100001
   Fault Priority: 0
   Fault Frequency: 1
   Mileage: 139458 km
   Time Indication: 0
   Date: 2000.00.00
   Time: 03:57:58

   Freeze Frame:
   RPM: 0 /min
   Load: 0.0 %
   Speed: 0.0 km/h
   Temperature: 84.0°C
   Temperature: 42.0°C
   Absolute Pres.: 990.0 mbar
   Voltage: 12.573 V

Readiness: 0110 0100

2006
gti
new throttlebody
knew adjuster on the side of the intake manifold

http://wiki.ross-tech.com/wiki/index.php/19649/P3193/012691

19649/P3193/012691 - Intake Manifold Runner Control: Open Stop outside of Valid Range

Possible Causes
Intake Manifold Tuning Valve Position Sensor (G336) faulty Intake Manifold Runner Control Basic Setting not performed

Motor for Intake Manifold Flap (V157) faulty

Possible Solutions
Check Intake Manifold Tuning Valve Position Sensor (G336) Perform Intake Manifold Runner Control Basic Setting

Check Motor for Intake Manifold Flap (V157) Perform Output Test

...

http://wiki.ross-tech.com/wiki/index.php/17506/P1098/004248

17506/P1098/004248

Contents
[hide] 1 17506/P1098/004248 - Intake Manifold Tuning Valve Position Sensor (G336): Open or Short to Plus 1.1 Possible Causes
1.2 Possible Solutions
1.3 Special Notes

17506/P1098/004248 - Intake Manifold Tuning Valve Position Sensor (G336): Open or Short to Plus

Possible Causes
Intake Manifold Runner Control Basic Setting not performed
Wiring from/to Intake Manifold Runner Control faulty
Intake Manifold Runner Control faulty

Possible Solutions
Perform Intake Manifold Runner Control Basic Setting
Check/Repair Wiring from/to Intake Manifold Runner Control
Check/Replace Intake Manifold Runner Control

Special Notes
When found in Engine: 2.0l TFSI, perform Basic Setting.

thanks
Neil

danishmkvgti:
as it says, check wiring to the flapper control or eventually replace flapper motor :smiley:

scopes:
cheers jake

i replaced the motor

so need to check the wiring, im no spark, what should i be looking for?

thanks
NEIL

:happy2:

danishmkvgti:

--- Quote from: scopes on August 07, 2013, 12:05:55 pm ---cheers jake

i replaced the motor

so need to check the wiring, im no spark, what should i be looking for?

thanks
NEIL

:happy2:

--- End quote ---

If the engine replacement didn't help i would replace the entire wiring loom, we did that on mine i believe it's app. 170£, that did the trick on mine :happy2:

scopes:
Where did you get the loom?

thanks
Neil

Navigation

[0] Message Index

[#] Next page

Go to full version