All Things Mk5 > Performance Modifications

another revo vs giac vs r-tech thread

<< < (2/5) > >>

robern2:
Can anyone comment on giac power delivery ?

Hurdy:

--- Quote from: robern2 on August 24, 2013, 08:57:37 pm ---Can anyone comment on giac power delivery ?

--- End quote ---

Someone call? :grin:

The GIAC power delivery at stages 1 to 2+ are what you could expect from most other tuners. It is quite aggressive and on the extreme stage 2+ map needs a 3" MAF housing on the intake. Obviously my circumstance is a little different as I now have the GIAC stage 3 map to go with the upgrade Loba turbo. Deploying the power at stage 2+ with FWD is always going to be down to grip and so you should be looking at something like Federal 595-RSR's or Toyo R1R's at least.

dokez:
Im on wmi with revo (ed30stage2+) and have adjusted my timing up to 7 even 8 with it on. It works wonders. Without it I can only run 5.#

So it does work  :happy2:

H17YD_L:

--- Quote from: Hurdy on August 25, 2013, 09:34:39 am ---
--- Quote from: robern2 on August 24, 2013, 08:57:37 pm ---Can anyone comment on giac power delivery ?

--- End quote ---

Someone call? :grin:

The GIAC power delivery at stages 1 to 2+ are what you could expect from most other tuners. It is quite aggressive and on the extreme stage 2+ map needs a 3" MAF housing on the intake. Obviously my circumstance is a little different as I now have the GIAC stage 3 map to go with the upgrade Loba turbo. Deploying the power at stage 2+ with FWD is always going to be down to grip and so you should be looking at something like Federal 595-RSR's or Toyo R1R's at least.

--- End quote ---

Hurdy, where do you get the 3" MAF housing, I can't seem to find one? Hoping someone does the 3"MAF housing and silicon to turbo with DV pipe too.

Tfsi_Mike:

I believe the Evoms intake has a 3" Maf housing but mapping needs to correct for it.

GIAC map for 3" maf housing

Navigation

[0] Message Index

[#] Next page

[*] Previous page