General > Detailing

Engine bay cleaning

(1/2) > >>

craig_t:
What are the best products to use for cleaning the engine bay.

torque777:
I've just done mine ...used autobrite jaffa clean ..agitated with a brush then power washed ...dried with blower then coated with autobrite engine protectant ..oh and don't forget to bag the alternator ..



sent using my own fingers

BlueSmokeyJoe:
I've used Meguiars APC to good effect before. As mentioned above, agitated but rinsed off with a small watering can as not to soak everything and most importantly, keep water/moisture from the electrics.

Afterwards, seal with Aerospace 303 sealant and your bay will just wipe clean in the future!  :drinking:

chowgar:
Can anyone help with what electrics need to be protected... dunno if someone could point out on a pic of the engine bay... gonna do mine soon as I am fitting a twin take and new engine cover... just want to make sure I protect everything that needs doing...

cheers guys

torque777:
I just make sure the alternator is covered in a plastic bag and I don't direct the jet wash lance too close to fusebox or battery etc ...you need some all purpose cleaner too ...

sent using my own fingers

Navigation

[0] Message Index

[#] Next page