All Things Mk5 > Mk5 General Area
Miltek downpipe fitment problem!!
Hedge:
--- Quote from: Toast on August 27, 2009, 10:26:56 pm ---Yeah its a 3'' downpipe Hedge :happy2:
--- End quote ---
I thought Ed30 system was 2.75" or 65mm. :sad1:
I'm sure a reducer will work. :happy2:
Deako:
Birdseed wouldnt be my choice of snack when working on the car.
Good luck getting it sorted!! :happy2:
CarrG:
I think the connecting pipe is wrong. Only 30 notes for a new one. Should be like this on mine:
Hope you get it sorted. Could just cut and sleeve.
NotNormal:
--- Quote from: Hedge on August 27, 2009, 11:13:45 pm ---
--- Quote from: Toast on August 27, 2009, 10:26:56 pm ---Yeah its a 3'' downpipe Hedge :happy2:
--- End quote ---
I thought Ed30 system was 2.75" or 65mm. :sad1:
I'm sure a reducer will work. :happy2:
--- End quote ---
Yeah, the systems are 2.75"
The down pipes are 3"
It should come with a reducer to fit it to the miltek system.
On my soot chucker, the DPF removal pipe is 2.5" and the system (same as ED30/GTi) is 2.75" - my reducer was missing :( .....
.....so i made one, contacted Miltek, the helpfull chap Pete sent me one out FOC the next day
If you need one, contact Miltek, they are only acouple of quid to buy
Toast:
Haha like your Idea of thinking Deako :laugh:
Phoned Milltek this morning Spoke to a chap called Leigh couldn't get Charlie who I usually deal with never the less he was a very helpful chap didn't have any connecting pipes in stock but managed to source me 1 through Awesome so everythings sorted :happy2: Thanks for the info guys Hope to get it fitted next Sat along with Hpfp and Anti lift kit :party:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version