All Things Mk5 > How to Guides / Troubleshooting
How To: EGR Valve / EGR Cooler Delete Mk5 TDI (BKD / BMN)
Matto:
Andrew, mine went on the rollers at the last TDISport day couple of weeks back. Only averaged 200 over 3 runs. 216 on the Shark rollers when it was mapped. Chris said throttle response felt flat plus there was a dip in my power curve. For 200bhp it should hardly smoke, mine pummels so I believe there is room for improvements.
AndrewJB:
Ah right your going to be hard pushed to see anything over 210-215 though, As said above i think the RR under reads aswell
I had the Stage 2 (Made 216bhp) and Stage2+ (228bhp) map on my PD170
Stage 2 smoked but was still legal levels, Stage2+ was totally illegal
vRSAlex:
That long grub screw has a hole down the centre of its. Its in the kit to use for the boost gauge tap.
Great write up.
Andy:
mine hardly smokes at all or so am told..be interesting to see what its like when I get it back from the tuners
jason_rmh:
--- Quote from: vRSAlex on September 07, 2013, 10:30:44 pm ---That long grub screw has a hole down the centre of its. Its in the kit to use for the boost gauge tap.
Great write up.
--- End quote ---
Ahhh... So I shouldn't use it to blank off the vacuum hose then. Lol.
What do you normally block the vacuum hoses with?
Cheers!
Jas
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version