All Things Mk5 > Performance Modifications

Rear Brake Pad Upgrades....

<< < (25/25)

Teutonic_Tamer:

--- Quote from: RedRobin on September 20, 2009, 09:55:06 pm ---
--- Quote from: DaveB1970 on September 20, 2009, 09:49:12 pm ---
Without locking horns again Robin and covering old ground, track cars no problem, no road ride height, uber stiff suspension.

The adverse dive can be dialed out when there are no other compromises to make

The S4 brakes just look like R32/S3 brakes from the front, you'd need to strip them and measure the piston to be sure...

Unless you asked of course in which case I'll stfu!  :signLOL:

--- End quote ---

....No locking of horns - Just discussion. We don't have to agree about everything.

At least you've now written it in plain English I can understand :grin: (re track cars) - The highly detailed tech stuff goes over my head.

No I didn't ask about if they were S4 brakes - I would have felt a bit stupid as they had S4 written on them.

:drinking:

--- End quote ---
Just throw a spanner in the works - they could have fitted an S4 caliper spring to an identical looking S3 caliper - therefore had 57mm pistons.  :wink:

Teutonic_Tamer:

--- Quote from: tony_danza on September 26, 2009, 12:28:37 pm ---
--- Quote from: RedRobin on September 25, 2009, 10:07:31 pm ---
--- Quote from: Hurdy on September 25, 2009, 08:40:37 pm ---
If there is so much difference with the pad wear, do you think that you could get VWR or JKM to alter the brake bias to give more bite at the rear?


--- End quote ---

....Is this done via software? If so, then Keith at JKM would be best to do it.

--- End quote ---

It's something T-T DEMANDED should be done, but as usual when asked to explain how you do it, he couldn't/wouldn't answer. I dont know anyone who knows anything about it or its parameters. I'm guessing it's a dealer version of VCDS job?

Worth finding out though.

--- End quote ---

Hey - that's a bit harsh!  I may have strongly recommended doing it - but never 'demanded' anything.  And I've regularly posted links to both the vortex thread and the RossTech wiki site.  :smiley:

Navigation

[0] Message Index

[*] Previous page

Go to full version