General > Detailing

Autobrite snow foam lance - what am i doing wrong?

<< < (2/2)

Kinks:
Its the pressure that creates the foam it works on a venturi the higher the pressure the better the mix

Sent from my GT-N7105 using Tapatalk 2

Kinks:
When I use mine it will hold for three mins at least and leaves a clear surface when rinced

Sent from my GT-N7105 using Tapatalk 2

Horatio:
Do you clean it after every wash? I found that after two washes the gauze would clog up and the foam wouldn't foam up nicely. I usually soak it in warm water, squirt a bit of cillet bang in the holes and a rinse through  :party:

s3kel:
Could be an easy fix ,try running hot water through the lance to clean it as the metal gauge could be clogged up ..have to played about with the black knob adjuster + and - while pressing the pw gun ? If all fails it may need a new metal gauge ..
http://www.detailingworld.co.uk/forum/showthread.php?t=84349

Navigation

[0] Message Index

[*] Previous page