General > Detailing

Snow foam lance problem - need your help

(1/1)

brookesb32:
Hi all

I have been using my lance for nearly a year with no issues unit a couple of months back when the foam started coming  out of the side holes in the black section and isn't as thick (if you take it off it is Coming from the 4 holes in the metal).

I have tried cleaning and descaling the lance in case it was blocked but apart from being very clean the problem still persists

Has anyone had anything similar and been able to rectify it?

Pic below is just with water going through as missed taking a pic when had the foam in the bottle so put water in for the pic

rich83:
Take a look at this guide to servicing it.

http://www.detailingworld.co.uk/forum/showthread.php?t=84349&highlight=snowfoam

brookesb32:

--- Quote from: richwig83 on November 09, 2013, 10:09:45 pm ---Take a look at this guide to servicing it.

http://www.detailingworld.co.uk/forum/showthread.php?t=84349&highlight=snowfoam

--- End quote ---

Thanks mate, had seen that but hoped I didnt have to do it  :grin:

brookesb32:
Any other thoughts guys before I take it apart?

Navigation

[0] Message Index