All Things Mk5 > Performance Modifications

Fitting a LSD - few questions

(1/3) > >>

Syrag64:
I have the LSD, complete new clutch and have just ordered the 2 diff bearings & shims, I also need some sealant, VW quoted £60 for this, can I use an alternative thats cheaper?

Also on my car at the moment sometimes the clutch pedal stays down and I have to lift it with my toe, do I need a new master or slave cylinder?

Also I am going to fit new engine mounts, is there anything else I should do whilst I'm doing all this?

Matto:
Factor in a wheel alignment also as I believe the subframe has to be removed  :happy2:

xjay1337:
Your driveshaft would need to come out, subframe stays in place. I've done my gearbox (on my TDI same method exactly) 5 times. Never needed an alignment afterwards.

The issue you mention regarding the pedal is indicative of a slave cylinder failure.

Syrag64:
I shall get a new one ordered then cheers  :happy2:

MC71:
As your Subframe is off for the clutch bits why not fit a new uprated front anti roll bar too, perfect time!  :wink:

Navigation

[0] Message Index

[#] Next page