All Things Mk5 > How to Guides / Troubleshooting
Quad Rear Lights / Skyline Mod using standard inner lens (NOT Valeo)
MateyGuv:
The black caps are voltage stabilisers and are needed other wise they will flicker. The rings I have used are blue positive and white negative and they do need to be wired up right. Not sure about which pins to use as I used the number plate light loom to do mine
JoeDarKa:
I took power for mine from the number plate light too. I ran a single positive wire up into the boot and into the dimmer. Then ran a Y shaped wire to the positive of the lights (my positive were pink). I ran a single wire to an earth point on the boot hatch to the dimmer. Then another Y shaped wire to the negative of each light (my negative was white)
Kevin37:
I see so that'll be why I won't be getting enough voltage to them then.
Where do I find the wiring for those lights then? Is it down the drivers side?
JoeDarKa:
Yeah down the drivers side. Pull the carpet up and you should see the rubber seal with the wire
Jaywoo-GTI:
Great work Mateyguv, Finally might have a decent solution for the 4 ring rears
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version