All Things Mk5 > How to Guides / Troubleshooting

Quad Rear Lights / Skyline Mod using standard inner lens (NOT Valeo)

<< < (2/34) > >>

JC88:
Looks great mate! I seem to remember my mate putting his headlights off his yaris into the oven on a really low heat for a couple of minutes or so which softened the adhesive and let him pop the front lens off. Not sure if this would work with the rear lights at all or if anyone would consider trying it but I thought I'd mention it incase it was a viable option instead of prying the front casing off etc.

JoeDarKa:
^^ im going to try this i think. Got 2 sets to play with

JC88:


Above video's a guy doing this to a 370z headlight. Not sure if this helps anyone :/

MateyGuv:
I did try experimenting by putting one is the oven before taking apart but made no difference and I ended up mis shaping the lense. The adhesive used on the inner lights seems to be a superglue type glue so heat doesn't really effect it much

JoeDarKa:

--- Quote from: MateyGuv on December 30, 2013, 10:24:11 am ---I did try experimenting by putting one is the oven before taking apart but made no difference and I ended up mis shaping the lense. The adhesive used on the inner lights seems to be a superglue type glue so heat doesn't really effect it much

--- End quote ---

--- Quote from: MateyGuv on December 30, 2013, 10:24:11 am ---I did try experimenting by putting one is the oven before taking apart but made no difference and I ended up mis shaping the lense. The adhesive used on the inner lights seems to be a superglue type glue so heat doesn't really effect it much

--- End quote ---

--- Quote from: MateyGuv on December 30, 2013, 10:24:11 am ---I did try experimenting by putting one is the oven before taking apart but made no difference and I ended up mis shaping the lense. The adhesive used on the inner lights seems to be a superglue type glue so heat doesn't really effect it much

--- End quote ---

Maybe i wont!  :signLOL:

Navigation

[0] Message Index

[#] Next page

[*] Previous page