All Things Mk5 > Mk5 General Area
Engine light after stage 2 with dp and cat **SOLVED**
Janner_Sy:
discription of the exhaust blank plate
http://briskoda.net/maintenance-performance/performance-down-pipe-question/138691/
discription of what might have caused CEL light on dash etc
http://briskoda.net/octavia-ii/random-cel-light/139597/
Aparoon:
Thanks for those replies and links. I think the issue was due to the fact that i drove home with the dp and cat on whilst running stage 1 which doesnt account for the sensor issues, i then uploaded stage 2 but it was too late by then. I have spoke to superchips and they say that stage 2 is setup to deal with the sensor issues so now i have cleared the codes the engine light has dissapeared and should not be an issue again :smiley:
Hedge:
I can't agree with that. I drove with stage 1 and full Milltek dp and cat for months.
It was only after the Superchips RR day that I changed and since then I have done around 3 weeks with the standard map.
Whose dp and cat have you got? 100 or 200 CEL?
Aparoon:
Its a pipewerx dp with 200 cell cat. I dont know then either but the car is running fine, the light came on after the dp and cat was fitted and the dtcs related to the o2 sensor?? I will see if the light comes back on after when i drive to work...
Janner_Sy:
might be worth sending an email to pipewerx asking if oneo f the sensorholes is plugged, and if that could be the cause, it solved it with my DP
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version