General > Detailing

Snow foaming help. Quick question please.

(1/2) > >>

Human Joist:
Evening all. After the advice on here I got a nilfisk pressure washer and autobrite snow foam lance and their matching wash. I used it today and this was the result.

I mixed about an inch in the bottom of the bottle the. Topped it with warm water and sprayed. It lasted about 5 minutes then most of it had run off. I was under the impression it would stay on for a lot longer ???  Have I got the mixture and quantities right. Also how much of the bottle do you use per car.

beetie:
just alter the settings on the lance. the front.part ant the dial on the top. (red bits)

you can get it to spray quite thick with the right settings

Marc-5-GTI:
I used my autobrite on my mates K2 and got this, I tried putting less water in the hopper, Mine still wasn't that thick though

Andy:
it Did the same to me when I used auto brite snow foam...put 2"  of foam in then changed the settings on the snow lance and it was like shaving foam coming out :signLOL:

Andy:




this was after 10 minutes of the snow foam been on

Navigation

[0] Message Index

[#] Next page