All Things Mk5 > Performance Modifications
How much NM does standard clutch take?
K9:
what is the max nm you can take out from a GTI standard clutch, before it starts to slip?
vRSAlex:
Could be anything from 250 lbft to 360 lbft. Every one seems to be different and will eventually slip at higher torque levels.
greygti:
Mine held fine for 7 months at 311 lbft then slipped like crazy !
spb:
446Nm rated on dyno (perhaps optimistic) and the clutch started to slip in 4-5-6 gear at medium range revs pulls (max torque) after 6 months on long journeys with full loaded car. This weekend was replaced with Sachs Performance kit on the standard dual mass flywheel. After the bedding is done I'll give it some WOT
GrayMK5GTI:
Mine slipped 3rd gear onwards with 311lb/ft on my old K03 GTI.
Not even going to risk a remap on my Ed30 until its had a clutch :sad1:
Navigation
[0] Message Index
[#] Next page
Go to full version