General > Detailing
The 'Lazy' Wash - Safest quick method
rdfcpete:
Guys,
This often crosses my mind and I never end up asking or checking with people in the trade like many of you on here, but - What's the quickest wash method that you can deploy that's also paintwork safe?
I used to do something like;
- rinse
- two buckets with wash mitts, an approved PHn shampoo
- rinse
- AutoFinesse Citrus spray/or similar
- rinse
- ironX/similar wheels
- SP detailer & drying MF towel
- tyre lacquer etc
Finito.
If I'm particularly rushing on a winters day or when strapped for time, I can do that in under 90 minutes taking care obviously.
I think the one thing that might gain me some time is using snowfoam instead perhaps.
What's the best 'quick but safe' wash method that you lot deploy?
Thanks.
stealthwolf:
Snow foam, rinse, 2BM wash, rinse, sheet rinse, towel dry. Maybe QD.
Once wheels are sealed they need only a rinse.
One day, I'll rig something up so I can use the water from my dryer into a butt and use that to rinse the car. Will dry spotless.
Shaw:
Cold water with fairy liquid in a metal bucket previously used to hold building sand. Used kitchen sponge. Throw remaining dirty, soapy water over the car and go to the pub.
Sent from my iPhone using Tapatalk
xjay1337:
You should be applying your pre-rinse agent (Citrus Power in this case) to the paint BEFORE washing it.. why would you pre-rinse a clean surface?
- rinse
- two buckets with wash mitts, an approved PHn shampoo
- rinse
- AutoFinesse Citrus spray/or similar
- rinse
- ironX/similar wheels
- SP detailer & drying MF towel
- wheel lacquer etc (???? what is this)
What I would do......
-Wheels cleaned first
-Rinse whole car
-Snowfoam / pre rinse agent (Ctirus Power in your case)
-Rinse
-Wash
-Dry
It's not really complicated doesn't need to be :happy2:
Tortaruga:
--- Quote from: Shaw on June 09, 2014, 11:08:28 am ---Cold water with fairy liquid in a metal bucket previously used to hold building sand. Used kitchen sponge. Throw remaining dirty, soapy water over the car and go to the pub.
--- End quote ---
That is pretty much what I used to do before I found out about detailing on this beloved forum.
Navigation
[0] Message Index
[#] Next page
Go to full version