General > Detailing

Steel Grey Detail

<< < (5/5)

xjay1337:
Use cquk and not have to worry for 18 months! ;)

dansmith180:
I just read the insane amount of layers you put on this  :scared:, your shoulder must have been on fire. Assuming you stick to traditional waxes/ sealants I would just use a glaze such as Chem guys glossworkz glaze or Poorboys white diamond and then 2 coats of Collinite 845 and that will easily last 6 months and give a real good shine. Otherwise as Jay says get some ceramic coatings on that bitch.

lukemk5gti:
I actually did have the same discussion on another thread and believe I did go overkill... This time I'll do less layers and see about the efficacy versus the thousand layers!

Thought about CQUK but @xjay1337 I don't have an indoor area to apply, it wouldn't turn out great if applied in outdoor conditions would it?

xjay1337:
You can do it outside as long as it's not too dusty. CQUK cures pretty quickly and you can always do a few panels at a time.
Long as there's no rain you'd be fine

C1 takes longer to cure I believe

Navigation

[0] Message Index

[*] Previous page