All Things Mk5 > Members Rides
Tornado Red ED30 - Winter update: Brakes/tyres/Home made valved exhaust
ed30sam123:
I have now plastic welded/fiber glassed and filled the valance and bumper, they are at the body shop getting sprayed, hopefully have them back on Friday.
Exhaust is fully welded up and the valve linkage is set up with the stepper motor. Reed switch is yet to be installed, will hopefully have that done by Wednesday along with routing the wires and installing the LED.
Next weekend will be fitting the bumper, welding on the hangers and the tip. Still undecided whether to go straight cut or slash cut :party:
omeydz:
Id go slashed twin tips.
Your build is tempting me to fit an exhaust valve too. going to non res my current system and if its too loud to bear with then Ill fit valve to get the best of both worlds.
Keep up the good work :)
ed30sam123:
--- Quote from: omeydz on May 24, 2015, 12:02:49 pm ---Id go slashed twin tips.
Your build is tempting me to fit an exhaust valve too. going to non res my current system and if its too loud to bear with then Ill fit valve to get the best of both worlds.
Keep up the good work :)
--- End quote ---
Its going to be single 4" exit, think i'm going to go with straight cut.... race car! :party:
I cant wait to see what the twin valves sound like, should be a big improvement from the previous design.
omeydz:
I see... will still be great!! Also would like to see/hear some clips of the exhaust too when its ready pretty please :smiley: :smiley:
ed30sam123:
--- Quote from: omeydz on May 24, 2015, 03:41:07 pm ---I see... will still be great!! Also would like to see/hear some clips of the exhaust too when its ready pretty please :smiley: :smiley:
--- End quote ---
I'll put some pics up when its done. :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version