All Things Mk5 > How to Guides / Troubleshooting

Can anyone recommend medium length breaker bar

<< < (4/4)

doylebros:
This is worth a read

http://www.myturbodiesel.com/wiki/vw-jetta-axle-removal-mk5/

And this

http://www.golfgtiforum.co.uk/index.php?topic=154422.0

doylebros:
It's just me getting mixed up - sorry if I've mixed you up Dazza your correct 70NM plus 90.

dazza:
No problem mate.

The bar i have really flexes when i put the 90 on the main bolt. Looking for a good bar to replace it preferable 1'2 inch drive.

Golf_GT_TDI:
There are different versions of the bolt, this explains it...



For removing them it's easiest with an impact gun or by hand ideally a 3/4" 1m breaker bar as they are tight as hell especially when corroded up.
For installing them I use the larger of the Halfords 1/2" torque wrenches followed by the breaker bar for the 180deg.
http://www.halfords.com/motoring-travel/tools-diy/tools-tool-kits/halfords-professional-torque-wrench-60-300nm

Navigation

[0] Message Index

[*] Previous page