General > Detailing

Foam gun

<< < (6/7) > >>

stealthwolf:
Once you've done the prep, something like a weekly wash shouldn't take long. It takes me an hour to do a weekly wash on the car which includes setting stuff up and putting it away. Foam, rinse, wash, rinse, sheet, towel, QD, done.

mrvertigo73:
@PaulED30 I have to smuggle the Autoglym in to the shed if that makes you feel any better!!

PaulED30:
 :signLOL:

It would probably take less time if I was used to it and i didn't get in every little nook and cranny (classic art attack  :happy2: ). All I need is a decent paint correction and then some decent protection and should be all good - especially now winters on its way.

mrvertigo73:
As Stealthwolf says, it's easier once you've done paint correction, protection etc.

Durbinator:
I have the same snow lance, I just fill it up with the foam liquid about 2 inches, fill the rest up with warm water to near the top and then attach it to my little karcher and that's it.

Sounds stupid but have you adjusted the nozzle on the top, you can usually achieve a very thick foam and yes the thicker the foam the less time it will last.

Also what foam are you using as I found this makes one hell of a difference

Navigation

[0] Message Index

[#] Next page

[*] Previous page