All Things Mk5 > Members Rides
Luke's GTI Build Thread - Update June 2018
Reecey:
very good write up mate, loads of good information that i need
lukemk5gti:
--- Quote from: Reecey on March 08, 2016, 10:01:15 pm ---very good write up mate, loads of good information that i need
--- End quote ---
Thanks buddy!
lukemk5gti:
Update June 2016
With the hotter summer months I've now started back using AC. Noticed it wasn't working well so I VCDS scanned and found the error code P00819 relating to a failed G65 sensor - Part Number 1K0-959-126-A
To change this sensor isn't much work at all if you have a 17mm crows foot spanner and suitable extension bar:
The sensor is at the front of the engine facing just slightly below the alternator
A quick change of this and a gas top up then I'm good to go.
lukemk5gti:
Update June 2016
One of my reg light bulbs went so rather than replace the standard light with an LED. I replaced the entire light unit with the Mk6 LED unit.
Part number - 1K8943021C
Very easy to do, just release screw and pop the old one out.
Shoduchi:
I'd say the best upgrade to do to our license place lights is fitting the mk6 LED full units: 1K8943021C.
They look great and don't give any bulb out error in the instrument cluster of our mk5s. :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version