All Things Mk5 > Members Rides
Raz Shadow Blue 'Project Retrofit' *Update Page 10*
RetroRaz:
--- Quote from: Rob1 on November 24, 2014, 05:06:52 pm ---Does the slip ring need to be changed, as I thought only the controller needed changing
Sent from my iPhone using Tapatalk
--- End quote ---
Only if you have a type 1 slip ring. If you have type 2 you are ok. Type 2 has part number ending in C
KieranR:
Great thread man. I need to subscribe so I can find the video on changing the steering wheel again! Thanks
RetroRaz:
--- Quote from: KieranR on November 25, 2014, 03:35:44 pm ---Great thread man. I need to subscribe so I can find the video on changing the steering wheel again! Thanks
--- End quote ---
Cheers Bud. Keep an eye out for more videos. Ill be doing more around Xmas time
RetroRaz:
UPDATE
Just fitted cruise control today plus the wire. It was pretty straight forward, was just a pain getting the wipers back in the original position after removing it to install the wire.
Had the Kufatec Heated Seats loom arrive too, spent all day yesterday fitting it in, As my seats were out of a 2007 i had to switch the looms around, which isnt too bad. All wired up but i damaged the wire that goes to the CECM so doesnt work at the moment. Getting a repair wire this week and will try again next weekend. Getting colder now and its harder to work on the car outside. Just to add, the wire loom wasnt colour coded, all the wires were grey, but its not hard to identify what is what.
2 Earth ring terminals
1 thick wire with big connector for live
1 thin wire with small connector for ignition
1 thin wire which says "pin 1" on it for the CECM,
4 wires going to the heater pane area (2 single cables and then 2 cables going into 1 connector)
Thanks to @Eddie-NL for his assistance on the wires.
Also some better shots of the car since cleaning it
Rob1:
We'll done mate. I should be sorting mine over the Christmas period
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version