All Things Mk5 > Members Rides
Dazza's Maintenance Thread
rich83:
--- Quote from: dazza on July 09, 2015, 11:48:00 pm ---Thanks mate!
I use Dodo Juice Supernatural Tyre Dressing.
Maybe the detailing gurus can recommend something even better.
--- End quote ---
Meguires endurance is good
Mattwoodison:
--- Quote from: dazza on July 16, 2015, 08:23:26 am ---
--- Quote from: Mattwoodison on July 15, 2015, 08:36:04 pm ---Where did you feed the wire from the battery to the amp thru the engine bay? I've done them before but can't find an easy way thru...?
Sent from my iPhone using Tapatalk
--- End quote ---
I have DSG so there is a hole where the clutch would be.
--- End quote ---
Me too, I'll have a look. If not I'll try behind the glove box
Sent from my iPhone using Tapatalk
TForrest94:
--- Quote from: Mattwoodison on July 17, 2015, 08:40:48 pm ---
--- Quote from: dazza on July 16, 2015, 08:23:26 am ---
--- Quote from: Mattwoodison on July 15, 2015, 08:36:04 pm ---Where did you feed the wire from the battery to the amp thru the engine bay? I've done them before but can't find an easy way thru...?
Sent from my iPhone using Tapatalk
--- End quote ---
I have DSG so there is a hole where the clutch would be.
--- End quote ---
Me too, I'll have a look. If not I'll try behind the glove box
Sent from my iPhone using Tapatalk
--- End quote ---
Remove the battery and the holder, below that follow the loom to find the grommet in the fire wall, when I did it I cut one of the rubber udders off (you will know when you see them) poke some firm wire through and it will come out quite high up in the passenger footwell (uk cars)
dazza:
Washed the car this morning then got caught in the rain this afternoon :sad1:
I usually take the beater if there is a chance of rain but its currently parked 2km away from my house due to all the tourists taking my spot :fighting:
Think i may try some hard protection for the paint can anyone recommend anything? Its 30ยบ+ at the moment and dusty.
Did manage to fit the Climair wind deflectors this week. Fooking expensive but i do like them.
dazza:
When installing my interior LED's i noticed the glove box light was not working.
There was no switch on the back of the glove box which was a bit strange.
Took the glovebox out today its been removed before and someone made a complete mess of it. What job would need the glove box removed?
The screw above the ashtray was completely sheared off 2 of the remaining screws were missing a controller that should be secured to the side of the glovebox was just flapping about ( i think it has something to do with the airbag as i says handle with care :confused:) Also ac pipe for cooling the glovebox was not attached. Should there also be a trim piece that covers the cabin filter??
Installed new switch now working as expected.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version