All Things Mk5 > How to Guides / Troubleshooting

Highline Cluster Upgrade Info and FAQ's

<< < (7/13) > >>

Ben_VTR:

--- Quote from: RetroRaz on April 13, 2017, 11:23:35 am ---
--- Quote from: Ben_VTR on April 13, 2017, 10:26:46 am ---Hi All,

I have a 2007 DSG Jetta 2.0 TFSI, with midline clocks, stalk buttons and cruise control.
I'm looking to upgrade to GTI Highlines, and also install a GTI MSFW with paddles.

What clocks do I need to buy? And also is there anything else I need to get? Will I need the highline control module aswell to use the MFSW buttons?

Thanks, Ben.

--- End quote ---

Hey Ben,

You can buy any highline cluster, but for the menu button to work you will need one with part number ending in 972,9873 or 974.

Alex Retro (Olsen-72) can supply and fit them for you

In regards to MFSW, yes you will need a Highline one. Follow this youtube video.



--- End quote ---

I had an Edition 30 with highline and MFSW, but can't remember if it had a stalk with the buttons on it.

Does the stalk with buttons still work? Whats the point in it once you have the MFSW buttons working?

Right so I just need to find a 972/3/4 cluster and I'm set? I'm based in Northern Ireland so will have to get a local crowd to do the coding. If i could get Alex retro to do it I would!

ducman77:
 Just a shout out to say a big THANK YOU to RetroRaz for this excellent write up :happy2:

Did my midline the highline swap there last week and this thread was invaluable :smiley:

Cheers buddy  :happy2:

Dave

RetroRaz:

--- Quote from: ducman77 on June 16, 2017, 11:27:05 pm --- Just a shout out to say a big THANK YOU to RetroRaz for this excellent write up :happy2:

Did my midline the highline swap there last week and this thread was invaluable :smiley:

Cheers buddy  :happy2:

Dave

--- End quote ---
No worries Dave :)

Sent from my SM-G955F using Tapatalk

neiller:
I've got myself a set of highline clocks went to get hem fitted on Friday and the garage had a problem they need some other bit of kit to read the code from the new clocks !

I've got a problem now with my own clocks the esp light and the tpms light is constantly on.

I've done the usual turn the wheel both ways then drive forward under 20kmh .

When I check with vcds I'm getting a few faults in the abs control module

Steering angle sensor,
Brake pressure sensor,
Lateral acceleration sensor all showing no or incorrect basic setting when I go to the adaption page to see the setting all I see is errors.

Any1 seen a fault like this before and could give me a nudge in the right direction

I will take a screen shot of the faults on vcds when I get a minute later !

Cheers


Sent from my iPhone using Tapatalk

v4rley:
Fault codes:

http://wiki.ross-tech.com/wiki/index.php/VW_Golf_(1K)_Steering_Assist

Navigation

[0] Message Index

[#] Next page

[*] Previous page