General > Old Event Details
Car in for Milltek and other things ;)
joesgti:
--- Quote from: Phil Mcavity on December 24, 2008, 10:41:51 am ---Its a dyno lottery joe, yours if it was put on jkm would only get 230approx, chris's (WHITEGTI)yesturday is stage 2 revo, full apr and was 245bhp. So yours at 251bhp on JKM rollers is a no chance in hell getting that figure. Robins again is higher state of tune then just stage 1 and a dump valve. An intercooler is not gonna give you any power increase joe as you have that and robin doesnt and nor does Chris (from memory)
All the cars need to be on the SAME set of rollers on the same day to then have a better idea.
Both cars we all thought are spot on, torque curves are all smooth, so i dont think anything wrong why they didnt get over 250.
--- End quote ---
well chris's getting 245? you just confirmed, running stg 2 and apr, so the only difference is robin is running a milltek and pleanty of other mods, and still 236. oh and i think youl find that a bigger cooler will add noticable power.
Greeners:
I thought Robin had already said his map had been turned down? :confused:
illyun:
--- Quote from: joesgti on December 24, 2008, 10:58:57 am ---
well chris's getting 245? you just confirmed, running stg 2 and apr, so the only difference is robin is running a milltek and pleanty of other mods, and still 236. oh and i think youl find that a bigger cooler will add noticable power.
--- End quote ---
I'm not sure you're right there Joe. An intercooler stops power loss due to heat soak. It doesn nothing to ADD extra power.
As for JKM's RR, I was surprised when I had my Edition 30 put on the dyno as it only showed 224bhp as standard, especially given that other Edition 30's regularly get 240+bhp on other dynos. I put it down to my engine still being tight as 95% of the mileage on it is motorway miles. However, I think Keith also doesn't massage the figures and settings to produce the power figures while some other garages might. After Revo Stage 1 I got 278bhp on the dyno - Revo claim 305 bhp - and this seemed poor in comparision to other figures that people mention on this and other forums. Its only with Stage 2 and a host of mods - see my sig - that I finally got 320bhp. But the thing with the dyno at JKM is that it is the best type of dyno you can get and is operated by someone who doesn't like to manipulate bhp figures, so I know I can rely on the readings I get at JKM.
MAT ED30:
so what people are saying is all tuners talk sh1t and JKM rollers are gospal so all tuners should take their cars there to prove they are getting what they say
WhiteGTI:
lol!!!!
Helllllooooooo!
Robin and I are running the same boost setting, but with slightly different timing and fuel figures.
I am running Boost - 6, Timing - 5, Fuel, 8.
I expected more than 245.3hp, but I'm not too fussed I guess! I had predicted around the low 250's. But who knows....maybe on a colder, less humid day I would have got 251! Curves look nice, I'll post a photo of them later. Hitting around 291ft/lb of torque which is ok.
To confirm: I do not have an intercooler. Merely Stg2 Revo, TBE APR and Carbonio.
Echoing what Steve said for a fair comparison all cars must run together under the same conditions/rollers for it to be fair, which is obviously much easier said than done!!!
Keith at JKM said that if I was to put a full intake system on there such as the Forge/Evoms, then I could expect a 7-8hp gain immediately! But then, I have to think about the fuelling issues from the stock fuel pump not being able to cope with the increased demand on fuel. Vicious circle isnt it!!!
As Robin has said, running Boost 6 is ensuring that the turbo is still running at around 70% headroom, which is good to know.
Keith said that originally he ran my car at Boost 7, and it felt a lot quicker than at boost 6, but then he saw that the fuel pressure was falling when the car was loaded, therefore potentially leading to fuel cuts/misfire - which isn't what I want!
I agree with Joe, in that the intercooler will probably make a small difference in overall hp.
:smiley: :smiley:
Good to see you folks again, apologies that I had to shoot off, had quite a busy day. :smiley: :smiley: :smiley:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version