All Things Mk5 > How to Guides / Troubleshooting

top mount bolts

(1/1)

Danbear79:
Ideas needed... tonight i went to fit my coilovers but 1 of the 3 bolts on the strut tower is kaput. After lots of trying to remove the bolt and knackering the bolt on the underside, i still can't remove it. Is it a case of drilling the bolt out from the top? Really wasn't expecting this,  so any ideas will be appreciated

scottharvey:
I had same just use a air chisel or if not just a lot of welly and a hammer and chisel

GrayMK5GTI:
I had the same too. Drilled it out

Danbear79:
Glad I'm not the only one haha. I drilled it out in the end and greased them up when re fitted

Navigation

[0] Message Index