General > Detailing

Help ! What products do i need - Candy Ed30

<< < (3/5) > >>

Truckie:
Think you may be talking about me....yeah angel wax is pretty good stuff, i had a layer of seal under that day but have since taken off and re applied the angel wax (2coats)and it beeds water like nothing else, it also gives a really deep natural looking shine...for candy white this is the way forward, plus i hear washshop is cheap too! Try and get hold off the anchem tyre shine as well, ask kieth about it, good combo with the angel wax.

autoperfection.com:
Keith - we haven't tried Angelwax... any chance of a sample?!?!   :smiley:

Eccie:
I use the following gear on my bit of Candy; I like it to look good, but it’s only a hobby, not an addiction - honest :ashamed:


Tar removal          autosmart tardis
Tar & contaminates       Bilt hamber auto clay
Inside             Meguiars All Purpose Cleaner
Inside             Werkstat satin pro
Polish             Autoglym Super resin polish
Polish            Menzerna Power Finish PO203s
Polish/cleaner/sealant    Werkstat Prime 
Sealant                  Werkstat Acrylic Jett Trigger
Wheels                  Wekstat prime strong + collinite 476 (but will switch to FK1000P when the collinite has gone)

The Werkstat was recommended to me by JPC  :wink: its easy to apply and top up every month or so

subaru26675:
Well I have ordered my angelwax tonight, but in my haste forgot to add applicators etc  :grin:
Will need to give wash shop a shout to see what the best preperation methods are before applying the wax and what applicators i need tomorrow.

Kev.

Truckie:
Good choice mate, dead easy to apply and remove. just read a review of the same companies wheel wax, think ill be trying some of that next! further and further down the slippery detailing slope! :signLOL:

Navigation

[0] Message Index

[#] Next page

[*] Previous page