All Things Mk5 > How to Guides / Troubleshooting

FITTING OF OSIR VENT BOOST GAUGE

(1/3) > >>

Kam88:
I have just hold of OSIR vent boost gauge there is a positive and negative that connects to the light switch if i am correct? and also little hose that needs to be connected somewhere under the bonnet now the help i need is:

1. How to remove the vent without damaging it ?
2. Where do i connect the little hose to ?? i also have a forge recirculating dump valve if that at all makes a difference any help be great?

fab5freddy:
1. Trim removal tool - very easy
2. Connect it to your diverted valve and hey presto  :smiley:

Kam88:
Don't have DIVERTER valve any more got dump valve with two hoses that come out of it which one do I use lol also its mk5 ed30

fab5freddy:
Have you the little adapters that screw into the side of the valve? If you do use the one with the smaller hole for boost gauge

And it's still a diverted valve, tfsi's don't dump boost, think yours is a BOV?

scopes:
what he says ^^^
Show us a picture of your dv fitted to your engine bay, we could maybe direct you better.

The boost pipe needs run in through a rubber gromet, to connect onto the gauge.

Navigation

[0] Message Index

[#] Next page