All Things Mk5 > Sat Nav and Car Audio

RCD510 fitted, now phone problems???

<< < (2/3) > >>

xxx_mojo_xxx:
Sorry to jump in here... but I have a similar issue with my Fiscon kit... any suggestions?

mortygttdi:
Could well be the same issue Mojo see what Garth comes back with and he might get something put on this thread on how he sorted it out??

Darren

Garth:
Right then, I moved the tel mute connection, which was not that easy as it has moved to a pin that has no connector on the standard quadlock.
Anyway, the head unit now displays a phone symbol when a call is active and the volume control on the steering wheel now acts as volume for the phone during a call which it should.

Problem is, voice dialling STILL does not work! Holding the phone button does a last number redial so the button and connection to the Parrot is still ok but somehow it's not recognising a single press of the phone button.

I'm wondering whether this is because the head unit is trying to handle this request and not allowing the Parrot kit the signal? Maybe there is something in VAG-COM that can be enabled/disabled on the head unit to change this?

mortygttdi:
You will have to set the parrot up again Garth, have you got the instruction if not I have some here for the CK3000Evo?

Cheers

Darren

Garth:

--- Quote from: mortygttdi on December 05, 2009, 03:12:18 pm ---You will have to set the parrot up again Garth, have you got the instruction if not I have some here for the CK3000Evo?

Cheers

Darren

--- End quote ---
Thanks for the suggestion. I erased the memory on the Parrot, re-paired my phone and also did a hard reset of the multi-can but nothing changed  :sad1:

Navigation

[0] Message Index

[#] Next page

[*] Previous page