All Things Mk5 > Members Rides
White "Lion" Cupra - DSG converted track car
Shoduchi:
Maybe you need to code out the cornering lights with the fog lamps? Have you checked if that option is deactivated? :confused:
teo_parvu:
First, thank you guys for the suggestions. :happy2:
--- Quote from: Shoduchi on March 21, 2018, 07:18:41 pm ---Aren't those the side lamps that American cars have on the front bumper? Maybe you need to code yours for Europe? :confused:
--- End quote ---
I'll google and see what I cand find, maybe there is a bit somewhere and it will solve it.
--- Quote from: Christiank on March 21, 2018, 08:21:16 pm ---Well it can be alot of different things mate.. Does your car have original xenon lights? - If so, then check the leveling sensor at the left rear axle.. If there's nothing wrong here then see you CECM coding (09 central elect.) and see what the coding says about the cornering light :)
--- End quote ---
Hmmm...I have the original xenon lights, but they were running fine, this started after replacing the control module. I've tried some things on/off in central electrics, unfortunately it didn't solve it.
I thing I might have to go to someone specialized in retrofitting. :confused:
--- Quote from: Shoduchi on March 21, 2018, 08:42:49 pm ---Maybe you need to code out the cornering lights with the fog lamps? Have you checked if that option is deactivated? :confused:
--- End quote ---
I've already did that or at least i think so. I will try to check everything again in central electrics when I'll have my car back.
If I don't find anything, I'll try to find someone skilled in VCDS coding.
Christiank:
Normally when a car gives this error, it's has always been the leveling sensor that's making the issue .. Would defo check that, on LHD cars it sits on the left side on the rear subframe
teo_parvu:
Wow! Didn’t know this one.
Next week the car should be back from the rear wing installation, hopefully the snow will clear and I’ll check it. I believe I should remove it, inspect for any physical damage, grease it, wd40, reinstall it. Maybe it will solve the issue.
Thanks man. :happy2:
teo_parvu:
It's snowing for 14 hours here in Bucharest, now we have at least 20 cm of snow. While at home with some time to spare, I decided to make my own wing end plates, never liked the plastic ones that came with the wing:
I bought a small angle grinder and I've cut them out from the splitter plate leftovers. The result is much better that the original ones:
While I was doing the plates the guys at shop finished the mounts for the wing, the original Golf VI ones don't fit on my Leon's roof top: :fighting:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version