All Things Mk5 > How to Guides / Troubleshooting

TPMS tyre pressure wiring help

(1/1)

RetroRaz:
Hi all.

I bought a tpms kit and not sure what some of the wires are for or where they go. Can someone help?

I know this one goes to the abs pump as it's the longest wire




Not sure what these 3 wires are for




And then this black connector comes off

Degudodger:
Used this guide when i fitted mine.
http://www.mk5golfgti.co.uk/forum/index.php/topic,25814.msg335319.html#msg335319

RetroRaz:
 aah so remove 3 wires from the ABS plug and connect into the black connector and then the 3 remaining wires on the TPMS loom go back into the abs pump. As if its going in a loop?

omeydz:
Yep its a loop Raz.

This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)

RetroRaz:

--- Quote from: omeydz on April 30, 2015, 08:30:55 am ---Yep its a loop Raz.

This indirect tpms monitors abs sensors for rotational speed differences which result from a tyre loosing pressure. Not as accurate as direct sensor method but well worth it otherwise :)

--- End quote ---

nice one omar. I will give this a try next week some time :)

Navigation

[0] Message Index