All Things Mk5 > How to Guides / Troubleshooting

Xenon coding issue??

(1/2) > >>

RetroRaz:
Just checking if this right, coded some xenons for a member on here ( @rukz ). Coded it as xenons with shutter installed, wires are run to the cecm.  However when the xenons are off and you flash the lights, the halogens dont flash,the xenons do.  Is that correct?

fab5freddy:
There's another check box  (can't remember which one) where you can enable halogens. Work your way through all the check boxes and you'll find it

RetroRaz:
I think I did check  that and try but then when the xenons were on and you flash, the halogens would flash as well as the xenon shutters. Really weird.

fab5freddy:
Sounds normal too be honest, think from memory mine does the same if you've both those boxes checked, I'm out at the minute but I'll double check for you later  :happy2:

Rukz:
Only just realised you started this thread @vw55raz  :happy2:

I do like the way it is now with the xenons flashing (looks like a far newer car).

However, I'm constantly worried incase the bulbs/ballasts get damaged or completely go :sad1:

Navigation

[0] Message Index

[#] Next page