All Things Mk5 > Performance Modifications
Pipewerx 3" Exhaust Down Pipe High Flow Sports Cat Help
rashg60:
By the way this now means I am selling my stock OEM system, including downpipe and cats.
It came off my car at 66,750 miles and is in very good condition.
Please contact me for any further information.
Bigjimknickers:
Did you get the map tweeked to suit the BCS?
rashg60:
Yes mate did get it done.
With the tweak it is now running at 273bhp and 347 lb/ft torque.
With a big mod like the exhaust, it makes sense to get the map tweaked to suit/take full advantage.
AJP:
--- Quote from: rashg60 on July 17, 2016, 10:59:03 am ---Yes mate did get it done.
With the tweak it is now running at 273bhp and 347 lb/ft torque.
With a big mod like the exhaust, it makes sense to get the map tweaked to suit/take full advantage.
--- End quote ---
How's it running at the minute Rash?
Mine's in with Steve at Statller in a week. He did a quick scan and there's a fuelling fault (as I thought), but he's going to log it properly to see exactly what the issue is. Said it could be the LPFP.
I'm bracing myself a bit. Could also be an injector causing the dodgy cold idle, or a coilpack. And the fuelling error could be a worn/dead cam follower causing pump issues and worst case, camshaft damage. It had a new follower about 6k ago though, so fingers crossed.
I did pick up a Loba pump a few weeks ago, so that'll be going in regardless. Best case scenario is that is all it is; standard pump struggling and simply causing fuel cuts, and the Loba sorts it. Doesn't explain the idle though... as far as my knowledge goes!
rashg60:
To be honest, mine is running very smoothly indeed and very quick. I think it was just having a bad day that day. I now take it out around once a week to give it a good thrashing and that sorts it out. I hardly drive it during the week though, so could just be that.
Please do keep me updated about your issues, just in case I experience them also. Fingers crossed I won't have to. Been lucky so far with the clutch etc.
PS - I ordered the Edition 30 front splitter (non original - was recommended by a few peeps on here and I've seen it in real life and it does look good). Anyway got some quotes for spraying that and the side skirts. Once they are done I'll put the bumper on in one go. Don't want it looking odd with just the bumper.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version