All Things Mk5 > How to Guides / Troubleshooting

Bottom end (short motor) are DSG and manual the same? And will AXX head fit bwa?

<< < (2/2)

Ricky123:
Nope they work fine I combined both in the end without any issues

Sara:
Basically I had AXX engine then bought BWA from breakers down south which in the end up the head was goosed so got my original head (AXX) got it skimmed and used the valves from (BWA) to repair my original head so (AXX) head went onto (BWA) bottom end so all was looking sweet and work was coming closer to the end
Fitted engine was slight Miss fire cylinder 2 then problems with oil pressure so after several months of saving money to keep trying to repair it and cost down the oil pressure was repaired that was all good then about 2months later started viberating shaking pretty bad so changed coil packs and plugs at times it calmed down then gets worse in time still misfire cylinder2  so thought might be fuel injector changed that with seals then BOOM no f*****g changes

Michaeldal:
Im a little confused and perhaps dense, but do you buy the garbage bags BEFORE or AFTER the paint pen??

Ricky123:
Dsg and manual bottom ends are compatible with both style of gearbox

Axx and bwa heads and bottom ends are both interchangeable with each other

Have you had vcds scan done on your car? If your still getting a misfire on cylinder 2 after changing plugs, coil pack and injector then the next thing to do is a compression test

Where abouts are you located? If your not too far from me then I'd be happy to come and have a look at it.

Navigation

[0] Message Index

[*] Previous page