All Things Mk5 > How to Guides / Troubleshooting

Mk6 climatronic problem

<< < (3/3)

99hagued:
Ok so iv fitted the can gateway and coded it no problems and iv connected the two flaps in parallel so the vents now open when ac is on. There's a few problems I have noticed, when the ac is on the vents are like blowing faster and slower?, the recirculation doesn't seem to do anything when pressed?(I bought the version without auto recirculation) and I have a few faults stored in Auto HVAC,
13701424 - function restricted due to missing message(s)?
13701456 - function restricted due to missing message(s)?
one other thing is the fan on the lowest setting is still quite fast?. How does everyone elses compare who have this fitted in a pre 57 with two flaps,
does any one know if doing the other wire swap in the small black terminal (On B Connector (black): Pin 6 to Pin 7) would cure any of my problems?

99hagued:
Been doing some more homework and iv found the fault codes are because I need newer dials and BCM I can live with that. iv been reading on the skoda forums http://www.briskoda.net/forums/topic/277700-step-by-step-retrofit-fl-climatronic-module-to-prefl/  (same setup as the golf) its seems if you have a two flap heater system found in the pre 57 golf then the mk6 climatronics wont function 100% the recirculation wont work, I can live no recirc but the noise it makes when ac is on needs sorting its like the flap inside is opening and closing making the air flow sound faster and slower, so going to try and play with the connector B (black) see if I can fix that.

Navigation

[0] Message Index

[*] Previous page