All Things Mk5 > How to Guides / Troubleshooting

How to set OEM Xenons Flash to pass function properly (US STYLE)

<< < (2/3) > >>

DANBOY66:
done this using the video and mine was a little different

it would not let me untick bi xenon so i could select it again
my flash to pass box is left unticked
and my running lights are byte 20 and was on 92x1 i changed it to 1x1

i think that was all

but they are working the same as yours are :)

RetroRaz:
Nice one Dan.  Might  be slightly different depending on which cecm version you have.  I done my method on 2 cars which were both 05 so might even be a year thing as well

rich83:
..... I need to do this, just CBA running the wires  :signLOL:

Rossimac:
Hmm any guide on how to get to the CECM? I've got my cables under the passenger glove box area just not sure where to go from there!

Will do all that you've got above though!  :happy2:

RetroRaz:

--- Quote from: Rossimac on July 13, 2015, 05:02:09 pm ---Hmm any guide on how to get to the CECM? I've got my cables under the passenger glove box area just not sure where to go from there!

Will do all that you've got above though!  :happy2:

--- End quote ---
Run the wires behind the ashtray area and to the drivers side footwell.  The cecm is above the gas pedal in the corner.

Navigation

[0] Message Index

[#] Next page

[*] Previous page