MK5 Golf GTI
All Things MK6 R and GTI => MK6 How to Guides / Troubleshooting => Topic started by: mkmg76 on March 27, 2021, 05:41:33 pm
-
Afternoon all,
Anyone have a multimeter or power probe and has a few minutes free to check out which wires do what on a MK6 MAF at all please?
Cheers for any help.
Mick.
-
Would help to know where you are.
Sent from my iPhone using Tapatalk
-
Would help to know where you are.
Sent from my iPhone using Tapatalk
Wouldn't make a difference.
I need someone to check THEIR car and report back so I can compare notes.
Do you have a MK6 and a power probe and are willing to help?
-
Sorry thought you were asking for someone to come to you - I shouldn’t skim read.
Sent from my iPhone using Tapatalk
-
Sorry thought you were asking for someone to come to you - I shouldn’t skim read.
Sent from my iPhone using Tapatalk
We've all done it. :happy2:
I might have explained a bit better in fairness to avoid confusion but never entered my head that someone would read it that way!
-
In case anyone is curious, I'm getting Fault 000256, have replaced the sensor with a known good item and the problem persists so i'm thinking a break in the wire somewhere. I've peeled back the outer sheath and checked but there are no obvious signs of damage. All 3 terminals are showing Green (earth/ground) with a power probe when unplugged, wire 2 & 3 are showing green (earth/ground) when plugged in with wire 1 showing nothing.
I'm sure one should be red (live) when plugged in and the ignition on.
Looking to confirm this theory if anyone has a spare few minutes and wouldn't mind checking theirs.