Post by: Pissat4motion on December 13, 2018, 02:17:34 pm
Car is currently k04 with DM K04+ tune.. 3 bar map, JHM hpfp internals. Custom catch can. Billet aluminum oil filter housing. 034 aluminum insert. APR catted dp. R8 coils (of course lol). BMP CAI. Lowered on Raceland Primos over mk7 Austins. 17z BBK...15f/20r mm spacers. LED tails.
Interior wise? Eonon HU. P3 vent gauge. BFI heavy shift knob. Dash tray. R32 aluminum ashtray. Black hazard button. Drivers side underseat drawer. LED lighting. Tried the mk6 climatronic retrofit but could never get the a/c to work. Canbus gateway newer revision remains.
Immediate future plans? MFSW retrofit as soon as the CH revision module arrives. Cruise stalk revision G. Clutch upgrade (clutchmasters that's been collecting dust). Custom shift boot made with mk7 GTI cloth. Badgeless grille. Also have aluminum LCAs and a golf R IC boxed at my local shop.
I'm also on vwvortex and golfmkv forums under the same username. A lot of info here that I haven't really seen on those sites. Has me interested in a future cluster/clock retrofit.. and maybe giving the climatronic retrofit another shot.(https://uploads.tapatalk-cdn.com/20181213/8bb1234bb8b3a13484a3fe8665f6362c.jpg)(https://uploads.tapatalk-cdn.com/20181213/71e792b923ed81f2af5fafd724d84d11.jpg)(https://uploads.tapatalk-cdn.com/20181213/d9d1756a72b6ca537a5bf60b06bbb71f.jpg)(https://uploads.tapatalk-cdn.com/20181213/4c422d5d521311066369ccc002fc423c.jpg)
Sent from my Nexus 6 using Tapatalk
Post by: Pissat4motion on December 13, 2018, 02:35:17 pm
Sent from my Nexus 6 using Tapatalk
Post by: Pissat4motion on December 30, 2018, 03:04:53 pm
Decided to go badgeless just for a change.
Added a new shift boot (mk7 fabric)
Installed mk7 steering will (not complete)
***If anyone has knowledge about going from dual to single stage airbag I'd appreciate some input
***Install was fairly straight forward until I 1. Realized my car had dual stage airbag and 2. My mk7 mfsw had the wrong wiring loom
(https://uploads.tapatalk-cdn.com/20181230/4af5d8a83a4b2c7149135693e427c1bf.jpg)(https://uploads.tapatalk-cdn.com/20181230/818e4d469727b0e40c9f770fba204995.jpg)(https://uploads.tapatalk-cdn.com/20181230/adc085e739931b187fba166fcdcd7b6a.jpg)Sent from my Nexus 6 using Tapatalk
Post by: muff1991 on January 09, 2019, 10:38:14 am
Post by: Pissat4motion on January 28, 2019, 06:16:52 pm
The mk7 mfsw turned into an expensive headache. Without a custom wiring loom, which would have run ~$300, I wouldn't have had button/horn functionality. So I bit the bullet and bought a 2014 mk6 GLI MFSW... actually should have done it to start. Looks good. Feels good. Buttons function with my mfd and EONON hu.
Scheduling that clutch upgrade and RMS replacement for early February.
I've also found a local tuner than can possibly code a black/white cluster for me in the near future
(https://uploads.tapatalk-cdn.com/20190128/3c6566cbb184498e3e89d2efc2365c80.jpg)Sent from my Nexus 6 using Tapatalk
Post by: muff1991 on January 28, 2019, 06:28:16 pm
As for the cluster... what about mk6 clocks?
Sent from my iPhone using Tapatalk
Post by: gt28 on January 29, 2019, 07:09:24 am
Post by: Pissat4motion on February 01, 2019, 04:14:37 pm
Hi, love the look of the wheel, does all the buttons work with the mk5I think there's one button per side that doesn't work.. (but looking at the pic) possibly only one. I also have an EONON 5153 android radio so while phone button might not work for stock radio, it does with the Eonon if I have my cell phone linked through bluetooth.
I love the look of the steering wheel but the feel is a close second to the original mk5 GTI stock steering wheel.
@muff1991 (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=9978) I'll be looking into picking up a mk6 (scirocco from ebay) cluster probably this summer.
Post by: muff1991 on February 04, 2019, 12:22:42 pm
[/quote]
see, you know it makes sense ;-P
Post by: letssurf84 on February 18, 2019, 10:25:02 am
Post by: Pissat4motion on February 22, 2019, 07:57:53 pm
Clutch Master clutch installed and 500 mile break in is completed
. Rear main seal was also replaced.Will be doing a "rebuild" on my vacuum pump to did a nice sized oil leak..
Sent from my Nexus 6 using Tapatalk
Post by: Pissat4motion on April 23, 2019, 03:19:13 am
Installed shifter end link and bracket bushings. A noticeable difference in feel.
a/c has crapped out and in hoping of I swap out the compressor solenoid wool fix it..
(https://uploads.tapatalk-cdn.com/20190423/59965f7d93fd97ee488fb27dfd865f6f.jpg)
Sent from my Nexus 6 using Tapatalk
Post by: Pissat4motion on May 13, 2019, 01:21:01 am
(https://uploads.tapatalk-cdn.com/20190513/5cd5a7710d7b73c5d1166a20d3c522a9.jpg)
Sent from my Nexus 6 using Tapatalk
Post by: muff1991 on May 14, 2019, 08:56:46 am
Post by: Christiank on May 21, 2019, 09:45:35 pm
nice! you wouldn't really know that wasn't a mk6 in that photo would ya! was they easy enough to get coded? i guess that wasn't something you could do with VCDS? Maybe Vag Commander?
Really? A lot tells me it's not a Mk6 hehe..
take i look to my mk5 and tell what will give up on the picture that this isn't a mk6? :D
(https://i.imgur.com/Zoj8nnV.jpg)
(https://i.imgur.com/XDgozm2.jpg)
Great updated but be carefull - going down the retrofit path is a time taking path to take…
Post by: muff1991 on May 22, 2019, 11:35:39 am
Sent from my iPhone using Tapatalk
Post by: Christiank on May 22, 2019, 12:01:37 pm
Wow.. have you swapped the whole dash out Christian?
Sent from my iPhone using Tapatalk
I have :) with some facelift items, custom made cluster and MQB stalks with all buttons working along with MQB steering wheel with cruise control buttons that also works
Post by: Pissat4motion on May 22, 2019, 12:06:27 pm
A lot of work in that interior... and no dash lights!! I'll try to get you those scans later todaynice! you wouldn't really know that wasn't a mk6 in that photo would ya! was they easy enough to get coded? i guess that wasn't something you could do with VCDS? Maybe Vag Commander?
Really? A lot tells me it's not a Mk6 hehe..
take i look to my mk5 and tell what will give up on the picture that this isn't a mk6? :D
(https://i.imgur.com/Zoj8nnV.jpg)
(https://i.imgur.com/XDgozm2.jpg)
Great updated but be carefull - going down the retrofit path is a time taking path to take…
Sent from my Nexus 6 using Tapatalk
Post by: Christiank on May 22, 2019, 12:39:33 pm
So I don't have the old CECM and CCM modules in my mk5 like the rest of you does hehe :) I use 1K0 937 087 BA
Post by: muff1991 on May 22, 2019, 12:46:34 pm
Sent from my iPhone using Tapatalk
Post by: Pissat4motion on December 15, 2019, 01:06:52 am
No major changes. Running Serron wheels, sequential turn signals, and a Jetta grille. Also installed an 034Motorsport upper aluminum dogbone insert to go along with the aluminum lower insert already installed.
(https://uploads.tapatalk-cdn.com/20191215/fb03b50f9ecc93b01ffcdf3667de2bd1.jpg)
Sent from my Pixel XL using Tapatalk
Post by: Pissat4motion on September 07, 2020, 10:39:51 pm
VF engineering short shifter installed. Maxton design hatch spoiler extension. Picked up a mk6 GTI trying cargo cover, difference being mk5 doesn't have the added netting underneath.
Still considering installing a mk6 GTI abs pump and module. Need to do little more research on compatible part#s
Sent from my Pixel XL using Tapatalk
Post by: Pissat4motion on December 12, 2020, 04:17:00 am
***Osir fog light covers are on the way***(https://uploads.tapatalk-cdn.com/20201212/156d28152440592e6dfcebadd38cbcc1.jpg)
Sent from my Pixel 2 XL using Tapatalk
Post by: Pissat4motion on December 12, 2020, 04:26:57 am
Sent from my Pixel 2 XL using Tapatalk
Post by: Pissat4motion on January 19, 2021, 01:20:46 am
bumper.Also installed the OSIR fog light covers.(https://uploads.tapatalk-cdn.com/20210119/089b565b85079c62ccfb2da81e6f1653.jpg)(https://uploads.tapatalk-cdn.com/20210119/b0fa3676bf456d28c1b7a40643a96800.jpg)(https://uploads.tapatalk-cdn.com/20210119/9eac7c6c3f04305b0fa8b81fb5defb82.jpg)
Sent from my Pixel 2 XL using Tapatalk