MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Top Cat on June 12, 2010, 11:48:24 am
-
I have bought a ITG intake but i have a Ko3 and the one i bought came off a KO 4. Does anybody know the part number i need to convert to a Ko3. I believe they sell a bung to do this but cant find it on there web site.
Thanks in advance :drinking:
-
I would use the phone and speak directly to ITG. :smiley:
-
I would use the phone and speak directly to ITG. :smiley:
TC only knows how to use the web :signLOL:
-
I would use the phone and speak directly to ITG. :smiley:
I hate you being right all the time. :grin: :wink:
-
I would use the phone and speak directly to ITG. :smiley:
TC only knows how to use the web :signLOL:
We dont all have Statlers as a private garage like you. :signLOL:
-
Ok chaps need some help. Andy from ITG is on Holiday and the other chap their know notting. :sad1:
I have rang a couple ITG re-sellers, and they dont have a clue, even though they also sell the take off part that i require the blank for. :stupid:
So do any of you guys know the size and name of the blank that i need and where i could get one from. I have been trying over the phone to explain to people what i want but asking for a bung for a take off pipe on a ITG intake just gets a deafening silence over the phone.
Its getting close to inters and would like it on for then. :party:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Ftomashandmilly%2FDetailing_pics%2Fcoas.jpg&hash=d258933146bd3541a836cb6b8d1e2df43c589019)
-
get some duct tape :P
-
well i was bored so did some searching!
http://www.seatcupra.net/forums/showthread.php?p=3001545
dont say i never help!
You two could swap parts round? or you could buy that bung from
http://www.revotec.com/details.asp?ID=342
or i might have gotten it all wrong :D
-
Cheers Ed. :happy2:
Though 25 squids just for the bung side of the take off is painful. :happy2:
-
it is shiny tho!
thought if that guy was serious about swapping to a k04 he might take the itg off and you can swap with him the pipe! saves £25
-
I am sure someone would give me one if i hang on, but time is ticking. :driver:
-
just post it back ill do a refund it wont fit the ko3 :happy2:
-
Ok, it sounds like you need to find a 25mm diameter silicon bung if the revotec link above is used for the DV outlet on the ITG intake. Did you try Dubtek?
-
just post it back ill do a refund it wont fit the ko3 :happy2:
he can sell it to me! ill drive round with a hole in it :signLOL:
-
http://cgi.ebay.co.uk/25mm-alloy-dump-valve-blanking-bung-/270313313611?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3eefedd54b
or
http://cgi.ebay.co.uk/BOV-BLANKING-BUNG-PLUG-RECIRC-Valve-CNC-Machined-25mm-/270578679217?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3effbefdb1
the just bang some samco on between ..
-
seal it with one of these
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fwww.grams.com.my%2Fimages%2FvivaQC1.jpg&hash=f960a07e639a05e4a745ede4e0025ef8e991d7f1)
-
Surely you could just stick an old sock in it :evilgrin:
-
i shoved a HT end down mine and siliconed it up, then covered it with duct tape!! :grin:
-
Tape one of your Pea-nut headed sized beanies over the outlet, job done!
:booty: :booty: