MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: T4yy18 on December 17, 2023, 09:12:15 pm
-
Hi i have a mk5 git 2007 bwa
Recently i had installed ecs tunings high flow intercooler pipes for inlet and outlet. After when i turned the car on it would start then die after a few seconds. I unplugged the maf sensor and the car stayed running.
I dont have vcds but do have a cheap scannner and found codes for maf sensor and p2261 for divortor valve. I changed the diverter valve for a genuine rev g and borrowed a maf sensor off another gti and clear the codes. Started it and it lasted a bit longer but still died.
There was another senor that was on the inter cooler pipe to throttle body but i used the same sensor and it was plugged in ok
Does any one have any clue to what could have happen?
-
Sounds like a major vacuum leak. Re check your hoses to the IC
-
Hi i rechecked the pipes and they are all tight but still cuts out with maf connected