MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: keano on October 03, 2010, 12:30:53 pm
-
Hello,
Just wondering how the 'Edition 30' badge can be fitted to the front grill. I've had a look for a guide (im sure ive seen one before), but i cant find it anymore.
Any help would be super great.
Cheers :drinking:
-
I just stuck mine on using the original sticky pad and it was fine for well over a year and 40k miles :happy2:
-
Super Glue :smiley:
Mine hasnt moved in 2 years.
-
Super glue! :laugh: Ahhh!
I'll give it a good try later.
Thankyou for the quick responses guys. :happy2:
Have a nice weekend
-
I pressed the Badge onto the honeycoombe to get an imprint onto the adhesive sticker 1st. Then ran a small bead on that imprint and stuck it on.
The badge isnt going to be removed even if i sell the car.Im not bothered if i may have been mad using glue to help stick it.
hth
-
I just stuck mine on using the original sticky pad and it was fine for well over a year and 40k miles :happy2:
x2.
-
Be carefull as mine would not stick, in the end i used tape and some wire which i glued to the back of the badge and then twist tied it to the honeycombe
-
Just found a picture , i know it looks a mess but it worked well
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fi2.photobucket.com%2Falbums%2Fy8%2F182_blue%2FIMG_0161.jpg&hash=9359ef9f7bc08b167eaca644e9c0f278398aabb5)
-
Araldite :ashamed:
-
Just use the adhesive pad on the back of the badge, as has been said above! Worked perfect on mine!
-
As above. :smiley:
-
Such a simple addition... but it looks great!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Ffarm5.static.flickr.com%2F4129%2F4973668063_2f9b21b77a.jpg&hash=1f4cb4a62a19f5ff86efd2625a79911750e748c9)
-
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Ffarm5.static.flickr.com%2F4129%2F4973668063_2f9b21b77a.jpg&hash=1f4cb4a62a19f5ff86efd2625a79911750e748c9)
Does anyone know if the GTI badge^^^ can be removed? By that I mean, just the letters, leaving the flat backing/mounting plate on the grill. I am wanting to stick just the edition30 badge on the backing plate where the GTI letters are. :wink:
-
The gti badge can be removed easily i did it when i changed mine for red gti letters i just pulled them off and cleaned up the backing plate with white spirit if i remember right
-
Thanks Stu :happy2: I began to think no one knew what I was on about :ashamed:
-
no probs mate :happy2: