MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: Antreasv on May 06, 2022, 03:42:16 pm
-
Hello guys.. Started my first project on a Tfsi engine!
Building a new engine with forged internals my cylinder head is a rebuild one and missing cams and carrier girdle caps.
My question is: Does it affect the engine if i will buy good cams and use from a different engine the carrier girdle caps?
(https://i.postimg.cc/zfKbjtMk/cc5813eb409f84a4905babae687c.jpg) (https://postimages.org/)
-
They should line up - but I would bolt it together without cams to check all the journals line up
-
Don’t forget that the fuel pump lobes on the intake cam wear. Check measurements before you install. Also make sure that you get a later intake cam because the design changed (it became two part) and the metal is harder.
-
Personally I would get hold of a complete head with cams. They are line bored at the factory to the cams as a complete unit. Not saying second hand cams wouldn't work, but to mitigate any risk of that......I'd get a complete head.