MK5 Golf GTI
All Things Mk5 => Modifications & Technical Area => FAQ's => Topic started by: St282 on October 30, 2020, 06:56:03 am
-
Can someone help me figure out what is causing the MIL light on for ESC / tyre pressure. The 2 buttons by the gear knob doesn’t do anything now. Traction is fine as well as tyre pressures. Scanned the car nothing related to these lights. Recently changed MAF, MAP & ABS sensors, also new wheel hub bearings in the past year.
(https://uploads.tapatalk-cdn.com/20201030/a3a172882f38318e2b71a54538210606.jpg)
Sent from my iPhone using Tapatalk
-
I think all those systems use the ABS wheel sensors so I would start looking there with all the wet weather we’ve had over the last few days it can sometimes turn brake dust to a paste that’s coating the sensor face
Rob
-
I think all those systems use the ABS wheel sensors so I would start looking there with all the wet weather we’ve had over the last few days it can sometimes turn brake dust to a paste that’s coating the sensor face
Rob
Abs wheel sensor was changed a month ago and the area was not as dirty. The abs wheel speed sensor fault is now cleared but esc is still on
Sent from my iPhone using Tapatalk
-
We’re all the sensors changed at the same time ? If not maybe a different ones gone down
Rob
-
We’re all the sensors changed at the same time ? If not maybe a different ones gone down
Rob
Well abs, map, maf was changed same time last month. Wheel bearings a year ago. What other abs sensor is there?
Sent from my iPhone using Tapatalk
-
Theres a Sensor on each wheel so if one needed changing maybe another one now does , as I said water plays hell with the electrical connections as well as the dust
I would get it plugged in any problems should show up
Rob