MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Andy on December 23, 2009, 09:31:21 pm
-
i am thinking of putting wheel spacers on the rear of my car,what width is the best to go for.The alloys are orig R32 ones,will i need longer wheel bolts or can i use the orig one,s
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fcc20%2Fmaxitrol%2FIMG_0913.jpg&hash=e4b9cfe20982125f8faeab0f57c4878ababd0b90)
-
You will need longer bolts. I am getting some also. PM wheelman on here and he will sort you out! :happy2:
-
I'm running 10mm H&R's on the rear of my ED30, look great with no rubbing issues :happy2:
Longer bolts and lockers required, oem bolt length is 26.7mm iirc, i'm using 40mm H&R bolts and 41mm McGard lockers
HTH
-
dont use FK ones and you should be ok :wink:
-
dont use FK ones and you should be ok :wink:
Seconded!
Stick to Eibach or H&R imo :happy2:
-
cheers fella,s -where is the best place to purchase them from! if i get longer locking wheel nuts will the black cap still go oer the Mc gaurd ones
-
I found this thread useful:
http://www.mk5golfgti.co.uk/forum/index.php?topic=2139.0 (http://www.mk5golfgti.co.uk/forum/index.php?topic=2139.0)
-
What's the difference between the spacers Wheelman sells and the Eibach or H&R items?
-
What's the difference between the spacers Wheelman sells and the Eibach or H&R items?
Having not used the others it's difficult to comment but I have now had two seperate garages (one being VWR) that have commented on how well made they are and what a snug fit they are! :happy2: