Post by: Deako on November 03, 2015, 11:22:41 pm
Engine
EVOMS Intake
Rev G Diverter valve
Powervalve Sports cat back with custom "smaller" front silencer
eBay decat 3" DP
R-Tech Full PCV Delete
LOBA HPFP
BKR7EIX Spark Plugs
RS4 PRV
Creation Motorsports RFD Kit
Inlet Valves Cleaned
Forge Motorsport FMIC
Stage 2+ R-Tech
374bhp / 409lb ft
Interior
Mk7 GTI Steering wheel
Mk7 GTI Gear knob
RNS510 Rev R with SSD
7P6 Bluetooth module
Gladen 3 way component speaker setup
Mk6 Climate Panel
Corbeau Clubsport Bucket Seats
Sabelt 4point 3" Harnesses
Chassis
Bilstein B8 dampers
H&R Lowering springs
ECS Tuning top mounts
Powerflex rear bump stops
Revo torque arm
034Motorsports Dogbone bush set
Powerflex ALK
18" Team Dynamics Pro Race 1.5 in gloss anthracite
Michelin PS3
Tyrolsport Front Deadset Kit
Sachs Race Sintered Paddle Clutch & SMF
H&R 28/24mm Anti Roll Bar Kit
Planned mods: Superpro bushes all around
Brakes
Mk7 GTI PP Front Brakes
S3 rear calipers & 2 piece VWR discs (not fitted yet - refurb by BCR)
Mk6 Golf R front brake setup refurbished by BCR
Rear calipers/carriers refurbished by BCR
Misc/Styling
911 Oil / Coolant caps
Black washer fluid cap
TTS Engine Cover
LED interior lights
Cherished plate to promote business
Post by: Morgen on November 04, 2015, 04:31:43 pm
Post by: Deako on November 04, 2015, 10:55:36 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F1263CEAF-E52E-4ABC-9B40-A2A3D7425547_zpsykmtbrgl.jpg&hash=da4f61f26702b4dcadffce93a5bc655797422b3e)
Paintwork was in a bad way.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FC1B5FC61-741B-428F-B608-06B4D7989D65_zpshntczu7m.jpg&hash=f80a56a67eecc7bd8b54b4d74f410b9d73db5d1e)
After first session detailing.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F81E956AD-F36A-42C4-9141-7FAD9865AE05_zpskulctc8a.jpg&hash=ed4b3c02a2fb650ada8f37b34f45f56eb86dad3b)
New cherished plate.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FC2C6F8E3-0990-498D-9077-CF5D5285E208_zps0ok5kqgh.jpg&hash=205bb3b8438d794e11dfd1fa135a7dcb3ee96ccb)
Cleaned it a lot.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FFE84438C-D62F-4A52-8FEC-C543AF9318AA_zpsklftumc0.jpg&hash=d4b845efd26a93b8a25d15af60ecc6742d38b50e)
TDs fitted!!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F13C07D4D-6B65-42FB-A7ED-6935CAA00DF0_zpsrm8z6807.jpg&hash=edbf8aa6e6c7db8a00a3515b77f997021269594b)
Looking good!!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FABD6A774-1EFF-45D2-A38A-D9F307DE4C32_zpsym1g1xwh.jpg&hash=524c54d85d9d6d5caa3d40cdd309623948dfcd8e)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F98608D1E-FC96-4514-9EB6-B4B586BAEA79_zpsrelez81n.jpg&hash=caa1d1e4ed7198b101c40c278c43860d82ba8413)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F3F9DDCC1-667F-4452-B13F-10E0A5EC71DE_zpshwl2n5bz.jpg&hash=d9b52fd4d1915af3ecd80f6f5da2cf5d34e47686)
BCS system arrived.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF59E0105-B149-41E5-9F30-6EA391550F09_zpsygudyrxl.jpg&hash=ab31b3ee52448511be0fd83660f796a1e106cd23)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FA745DFD6-C00B-4C3B-893C-35CA307A20DE_zpsijne7shd.jpg&hash=97cead52c1978cec04e53f56d26d96ba7f8843d8)
Mk7 GTI wheel and RNS510 fitted.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F36D53731-AE71-47EF-B183-9E7F13E02110_zpsdjwruyth.jpg&hash=94fc46ac72837d5c4608c1d545d5beda3241e3fe)
Bilstein B8s with H&R springs and ECS Tuning mounts.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F82885BEE-3E51-4ECA-B07E-3C7E900B184D_zps2o9cp6w5.jpg&hash=5f6a13640ece59ee48ac978ff27f7ab9547f83c9)
More cleaning.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F4F399BCF-D813-49AD-A44F-A1C3FFBC8844_zpsqt1zv2j4.jpg&hash=9a238222922e570b37bc94f6edfc1099d8f242a1)
Old vs New
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F579F06DE-6FE4-4002-86D8-68FDEAB3E001_zpspfttvv4r.jpg&hash=b3b4cf7bda7e9faa0c63b0d1b171af4bf717086b)
Fitted up.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F05183B5B-98D8-4DAD-B5C4-D740D91C35A6_zpsl3j7xkli.jpg&hash=0472cd7e5a23697b20a5b2427b24ce49de274f31)
Still wasn't happy with the paint after my relative short time detailing her. So set out to give her some serious attention.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF9C9EDF8-F722-401E-87B8-98DD874D04F1_zpsxkdcpvwi.jpg&hash=bd3b51afb4479c9cb38d13f86f7a7a3e36a97704)
Much better
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FA8EC8D6B-96F4-479E-84FB-1D07E36D0AE0_zpsomdvplzj.jpg&hash=ef66066953568b69090c181354260a2cb837ab3f)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FAC6BCB34-8114-4EF8-B16E-DEAA74F48E91_zpswusraezj.jpg&hash=6943e3baf08f3cfc32182f3b65a823f4383f8f94)
Powervalve fitted pics.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FEEB7F4FB-E11F-41B8-96AE-137B129D9621_zpsxxso815h.jpg&hash=897744a158074d8bd88b08661e7d722fdd7e5c8b)
Cut up engine cover
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F87BA4495-4646-4656-B053-1F5A33910C99_zps7bcib18n.jpg&hash=43a1003a0209be0f1935c12f049f98431d09f676)
Golf R brakes heading back from BCR imminently.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FA151B885-BF48-4F35-95B2-B92F4F02F665_zpscin1vyeg.jpg&hash=0dd9bbd69ded2805bf2486ad98737f1a2f03aa83)
3" decat DP
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F6A943E60-B6C3-4310-92AB-AC5773101008_zps7nvhbttj.jpg&hash=f325748f737eba8a53db6e1afcd9288079f87d97)
Mk7 GTI Gear knob!!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF6C00829-9CFB-4994-A00B-60B1B92101A9_zpsqziluglx.jpg&hash=4d185dfb3bd35b3a5bfacfd4f019cb61901f306d)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F82A7D329-7AB4-4021-B193-FE20FAB44202_zpsmiz9vbgb.jpg&hash=d8e4b5f4d9cd70bb8907e22bb0407f04e98e7b3b)
Post by: dansmith180 on November 04, 2015, 11:07:43 pm
Post by: Mitch H on November 04, 2015, 11:33:22 pm
Post by: Andy on November 05, 2015, 12:09:25 am
Post by: Deako on November 05, 2015, 12:22:10 am
Post by: prp74 on November 05, 2015, 07:36:24 am
Post by: Dan648v on November 05, 2015, 08:05:05 am
Post by: rich83 on November 05, 2015, 08:27:04 am
Post by: Imwithstupid on November 05, 2015, 09:39:52 am
Post by: Morgen on November 05, 2015, 10:15:18 am
Very nice car you have!
Post by: Deako on November 05, 2015, 11:40:08 am
Is that exhaust valved?
Nope. Decided on the cat back and added a £130 eBay downpipe. :happy2:
Post by: white91 on November 05, 2015, 11:58:25 am
Sent from my iPhone using Tapatalk
Post by: patpong_pete on November 05, 2015, 02:00:13 pm
Deako nice mods sir do you have link or number to downpipe and whats your review of itIs that exhaust valved?
Nope. Decided on the cat back and added a £130 eBay downpipe. :happy2:
also the stering wheel does it all work as in light up and funtion with stero etc....
whats next on the list to do
Post by: rich83 on November 05, 2015, 03:07:21 pm
Is that exhaust valved?
Nope. Decided on the cat back and added a £130 eBay downpipe. :happy2:
Ohh right... just wondered why it says powervalve all over it... :signLOL:
Post by: Shoduchi on November 05, 2015, 03:16:33 pm
BCS now sells their exhausts with Powervalve letters instead of BCS. :smiley:Is that exhaust valved?
Nope. Decided on the cat back and added a £130 eBay downpipe. :happy2:
Ohh right... just wondered why it says powervalve all over it... :signLOL:
Post by: rich83 on November 05, 2015, 03:22:02 pm
Post by: Shoduchi on November 05, 2015, 03:27:59 pm
Thats a bit odd.... so its a powervalve but not a powervalve.Yeap. I guess the BCS name of the brand was replaced by the more appealing Powervalve name.
Post by: vRSAlex on November 05, 2015, 03:43:50 pm
Post by: rich83 on November 05, 2015, 03:54:12 pm
Still.... Great exhaust though. :happy2:
Post by: Tfsi_Mike on November 05, 2015, 04:17:43 pm
I don't think I'll be able to break the habit of calling them BCS lol. Car is looking great dude. Found a HPFP?
Post by: Deako on November 05, 2015, 04:28:52 pm
Deako nice mods sir do you have link or number to downpipe and whats your review of itIs that exhaust valved?
Nope. Decided on the cat back and added a £130 eBay downpipe. :happy2:
also the stering wheel does it all work as in light up and funtion with stero etc....
whats next on the list to do
I'll grab the link for you. Steering wheel works fine with a CH controller illumination doesn't work sadly. But hopefully there will be a solution.
http://www.ebay.co.uk/ulk/itm/181805777849
Post by: Deako on November 05, 2015, 04:49:15 pm
I don't think I'll be able to break the habit of calling them BCS lol. Car is looking great dude. Found a HPFP?
Looks like I'll be buying new along with Helix organic and DMF. :happy2:
Post by: Deako on November 05, 2015, 04:50:29 pm
They are now called Powervalve Exhausts LTD. Previously BCS Automotive Limited.
Yep. Spot on!! :wink: I've found people with boost actuated powervalve systems get offended when I refer to it as a powervalve exhaust. :grin:
Post by: Deako on November 06, 2015, 04:40:43 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F1D2A7098-08F2-4375-823F-2D31378A86AC_zpsg6uw3mfc.jpg&hash=2b32059e67691128a7ac0d34e75233ec171bf995)
Post by: beetie on November 06, 2015, 06:32:43 pm
There's one very similar to your deako one near me.
Post by: Deako on November 06, 2015, 06:58:05 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F5CEC7070-EDFB-4729-8F9A-6E398D894CFD_zpsouduc2r8.jpg&hash=05ec56328a7cf8c616cb4fafc8b92e402d97258e)
Post by: Deako on November 11, 2015, 09:09:54 pm
Post by: Deako on November 17, 2015, 07:35:53 pm
Some due to carriage, a couple look due to soft paint.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F53BD73E1-B0B3-4DFF-BBDF-16D00C97005E_zpsweabdavk.jpg&hash=406121f0cea9fefb34d31696f7bcabdd7793de63)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FD64A9429-56B8-4D25-84D8-22E8F5D0D024_zpsry74mhcl.jpg&hash=b63d22d7758e91635cc8bb8257317e9da99c9ffb)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF5E4F21B-D0F1-4DBC-8CEB-68EF571D48FE_zpsqpiblk1n.jpg&hash=afc13c2a8b4e5c966b4b89819233b97e9b650618)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F2047CE42-784E-4C9A-8807-33EC5153FFB0_zpsi0rxgloh.jpg&hash=8179a821340f813b944905afcc688604fe3067d5)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FD5E1805A-2067-4D3B-BFF1-01E5B1ECB952_zpsegdo4dmz.jpg&hash=3ad7a981a8bb1a5925d09f6d2e69ce64f1b054fa)
Also got my PALK fitted. Huge improvement to front end feel.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F222765C8-4ABB-4006-9465-D3ABE2729041_zps7y2cgioo.jpg&hash=c5331fb67eb9b4589dd04883ebec1d34afe183c8)
Here is also a pic of the 3" decat DP fitted.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F5B46D457-7F02-4BDF-AE29-082B41D596A4_zps6zxi1vot.jpg&hash=fc85ba9a833785c9925ed2963f622ca01570a58d)
Post by: ashbignall on November 17, 2015, 08:44:59 pm
Post by: MC71 on November 17, 2015, 09:08:04 pm
Post by: Mitch H on November 17, 2015, 09:56:46 pm
ALK make a big difference? Would you recommend it? Suspension is my next area to tackle probably with one of the ALK kits and b14 coilovers
Post by: Tfsi_Mike on November 17, 2015, 10:07:27 pm
Post by: Deako on November 18, 2015, 10:05:16 am
Coming along nicely :happy2: some tasteful mods there
ALK make a big difference? Would you recommend it? Suspension is my next area to tackle probably with one of the ALK kits and b14 coilovers
Yes. ALK has made a huge difference to front end confidence. Turn in is improved, traction appears higher. Not sure if some at this stage is placebo, and just from having nice fresh bushes. But I like it.
Post by: lewisako on November 22, 2015, 11:48:29 am
Love your number plate on the bike... :happy2:
Post by: Deako on November 22, 2015, 12:52:56 pm
Post by: lewisako on November 22, 2015, 01:01:45 pm
Ha. Awesome. I usually have it on my cars but fancied a change this time.
Love the ED30 btw as well, really smart. Look forward to seeing more!
Post by: Deako on November 22, 2015, 01:06:48 pm
Post by: BigA91 on November 22, 2015, 04:01:56 pm
The downpipe you've ordered off ebay, I notice it says item location 'Leicestershire' which is where i'm from but, it's showing signs on the listing that It could be actually from china or somewhere. How long did it take to arrive?
Post by: phatedition30 on November 24, 2015, 10:35:09 pm
Post by: Deako on December 08, 2015, 02:28:30 pm
Post by: Deako on December 10, 2015, 01:49:20 am
Post by: ed30Lewis on December 10, 2015, 10:02:36 am
Are you booked in for Stage 2+? Look forward to hearing the results. Im soon to be Stage 2+ also :party:
Post by: Deako on December 10, 2015, 10:03:54 am
Post by: keith on December 11, 2015, 11:56:44 am
Post by: Deako on December 11, 2015, 11:57:35 am
Post by: Deako on December 11, 2015, 09:14:13 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F97555A88-4ACE-45FB-8730-FC9670505F3B_zpstofxbquq.jpg&hash=33a2aca345c9a861b01fa98f6613e24135c13f51)
Fitted up!!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FB0AA4B1F-8AC6-4375-B799-2B90481AF988_zpsygvycrc6.jpg&hash=0c1ef094bb933398a7a12e74890749db18131f7a)
Having 2nd thoughts about the FMIC. Everyone keeps telling me it's not going to be good enough. :sad1:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F85E1C8C5-8090-46D5-BB47-C864DEA92180_zpstehwl7t3.jpg&hash=960cb5d45c8c9a4e09791ee3c886c12aadd1a649)
TTS Engine cover in progress.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F732AB607-D40F-4578-831C-EBACEFE8D0FB_zpsmycgzc3n.jpg&hash=7404025fd5155065d5c094453736b8c59f98e77e)
Seat inserts from Mandy!! :happy2:
Post by: Gti_Mad on December 11, 2015, 09:33:17 pm
Post by: patpong_pete on December 11, 2015, 09:37:59 pm
thanks for info and reply
does the Loba make any more midrange or the same untill remap stage 2+
Post by: Deako on December 11, 2015, 09:40:04 pm
The LOBA does make the car feel stronger but could be placebo.
Post by: Tfsi_Mike on December 11, 2015, 09:43:29 pm
I've read recently that it's not possible to buy the longer bolts anymore unless you can prove its for a tts.
How much was the cover from tps Luke? I'm looking at one atm £90 with the bolts but could do with painting
Post by: Deako on December 11, 2015, 09:44:52 pm
Post by: rdfcpete on December 11, 2015, 10:15:45 pm
So did you f\/ck the Rocco off, or have you still got that? A good friend has literally just got one of those but the 150 in the optional Purpley' colour, reminded me of yours :happy2:
Love the changes to the ED30. Amazing how just some centre caps make those wheels look a million miles different in perception.
If you don't stick with the cooler, for whatever reasons, should you change - what's next? Peron?
Missing out on all the TFSI fun, don't know how you boys can chop from diesel to TFSI/TSI like it's chocolate money... :grin: :grin: :laugh: :laugh: :evilgrin: @Deako (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=653)
Post by: doylebros on December 11, 2015, 10:19:52 pm
Got it from eBay. Wish I'd got a kit with bolts.
These do a modified fitting kit for to eliminate the worry of thread stripping https://deutscheautoparts.com/catalogsearch/result?q=Hpfp
Post by: Deako on December 11, 2015, 10:34:14 pm
Can't keep up Luke :grin: :laugh: :wink:
So did you f\/ck the Rocco off, or have you still got that? A good friend has literally just got one of those but the 150 in the optional Purpley' colour, reminded me of yours :happy2:
Love the changes to the ED30. Amazing how just some centre caps make those wheels look a million miles different in perception.
If you don't stick with the cooler, for whatever reasons, should you change - what's next? Peron?
Missing out on all the TFSI fun, don't know how you boys can chop from diesel to TFSI/TSI like it's chocolate money... :grin: :grin: :laugh: :laugh: :evilgrin: @Deako (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=653)
Lol. Rocco went around May. Left my job at the bank, went self employed running a detailing/vinyl wrapping company. And moonlight it with sub contracting in the vinyl/sign fitting trade.
If it got ditched I'd probably end up with a welly cooler. But just don't know. I'd like to give it chance and I just want a nice strong reliable car. I'm not chasing records.
Post by: Deako on December 11, 2015, 10:35:20 pm
Got it from eBay. Wish I'd got a kit with bolts.
These do a modified fitting kit for to eliminate the worry of thread stripping https://deutscheautoparts.com/catalogsearch/result?q=Hpfp
Was referring to the TTS engine cover. :wink:
Post by: Deako on December 17, 2015, 04:00:22 am
Just need to fit up my FMIC and get the clutch done then ready for Stage 2+. :party:
Post by: GrayMK5GTI on December 18, 2015, 08:23:05 pm
So this weekend a friend of mine is doing the inlet clean, RFD and RS4 PRV install for me.
Just need to fit up my FMIC and get the clutch done then ready for Stage 2+. :party:
Are you booked in for stage 2+ yet?
Post by: Deako on December 18, 2015, 08:30:32 pm
Post by: Deako on December 22, 2015, 10:37:36 pm
Picked up some VWR 6 pots and front & rear 2 piece discs. :jumpmove:
My entire refurbished setup from BCR will be for sale if anyone is interested.
Post by: Deako on December 25, 2015, 08:23:54 pm
I'll have 2x full sets of fronts (1x Refurbished in red and one standard S3 black) to sell and some immaculately refurbished GTI rears.
Post by: RBS on December 27, 2015, 05:17:51 am
Post by: aimar9992000 on December 27, 2015, 11:07:50 am
Post by: Jase on December 27, 2015, 01:06:22 pm
Post by: Deako on December 27, 2015, 01:10:50 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF514AC44-2D0C-46C4-9F29-AFF69A68E820_zpsamalvqxs.jpg&hash=6cbdcf2a55b99d7311306cf6ae95d89affa1918b)
VWR 6 pots all cleaned up. Came up quite nicely. Need new link pipes, bleed nipples and pads.
Post by: d11ps on December 27, 2015, 05:45:18 pm
Sent from my GT-I9505 using Tapatalk
Post by: Deako on December 27, 2015, 05:59:45 pm
Did you fit the HPFP?
Yes.
Post by: rdfcpete on December 27, 2015, 07:29:58 pm
Cheers guys.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF514AC44-2D0C-46C4-9F29-AFF69A68E820_zpsamalvqxs.jpg&hash=6cbdcf2a55b99d7311306cf6ae95d89affa1918b)
VWR 6 pots all cleaned up. Came up quite nicely. Need new link pipes, bleed nipples and pads.
:drool: :drool:
BR8K Pr0N :rolleye:
Got the right pipes and got these on yet Luke?
They look stunning, a clear advantage over similarly sized 4 pots, stupid question perhaps?
Post by: Deako on December 27, 2015, 07:44:04 pm
Waiting for the S3 rears to turn up, and I'll be sending my rear VWR 2 piece 310mm discs off for skimming to tidy them up.
Post by: rich83 on December 28, 2015, 02:01:40 am
Post by: Deako on December 28, 2015, 08:44:33 am
Can't you reuse the existing lines?
Yes. If one of them hadn't seized and needed to be cut off.
Post by: rich83 on December 28, 2015, 01:15:32 pm
Post by: Deako on December 28, 2015, 01:21:35 pm
Ohh. Are the threads ok?
Yeah. Just couldn't get a brake spanner on it, so had to use a narrow hex socket.
Post by: rich83 on December 28, 2015, 01:22:36 pm
Post by: Deako on December 29, 2015, 11:12:46 am
Post by: rdfcpete on December 30, 2015, 01:21:04 pm
Cheers for your reply on my IT/php thread btw Luke, I'll check it out properly when I can face the concept of not lying in till 10 every day :grin: :laugh: :wink:
:happy2:
Post by: Deako on December 31, 2015, 12:18:07 am
Maybe at some point. I see no benefit from them really. I had a spare so just fired that in with the new plugs.
Post by: Deako on January 04, 2016, 10:54:37 pm
Last few bits being fitted this week!!
Post by: Deako on January 04, 2016, 10:56:14 pm
Il be interested in a brake set up soon PM me ;)
Sent from my GT-I9505 using Tapatalk
@d11ps (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=14801) can't PM you. Still interested in a brake setup?
Post by: d11ps on January 05, 2016, 08:55:11 am
Yup I'm still interested :)Il be interested in a brake set up soon PM me ;)
Sent from my GT-I9505 using Tapatalk
@d11ps (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=14801) can't PM you. Still interested in a brake setup?
Post by: Cooper on January 05, 2016, 10:43:37 am
Not yet. Need to get in touch with Jonny at BCR in the new year for the new link pipes. VWR don't want to know, sh*t customer support tbh. The link pipes needed taking off due to them being the wrong way around.
Waiting for the S3 rears to turn up, and I'll be sending my rear VWR 2 piece 310mm discs off for skimming to tidy them up.
Good luck getting new link pipes, Jonny was unable to source any for mine when I had mine refurbed there so I had to reuse the originals
Post by: Deako on January 05, 2016, 11:17:43 am
Not yet. Need to get in touch with Jonny at BCR in the new year for the new link pipes. VWR don't want to know, sh*t customer support tbh. The link pipes needed taking off due to them being the wrong way around.
Waiting for the S3 rears to turn up, and I'll be sending my rear VWR 2 piece 310mm discs off for skimming to tidy them up.
Good luck getting new link pipes, Jonny was unable to source any for mine when I had mine refurbed there so I had to reuse the originals
Already spoken to him. He can make me some. :happy2:
Post by: Deako on January 06, 2016, 02:46:47 am
FMIC and clutch are being fitted this weekend by a friend.
Post by: TAPPY on January 09, 2016, 06:27:44 pm
Post by: Deako on January 09, 2016, 06:32:43 pm
Owe some serious gratitude to my mate for the work he has done on the car today. :notworthy:
Post by: TAPPY on January 09, 2016, 06:36:11 pm
Cheers Mark. Was good to meet you too. Few problems today with wrong parts and fitment issues, but getting there.Yeah hope it's ready for Wednesday so we can see what figures you get :popcornsoda:
Owe some serious gratitude to my mate for the work he has done on the car today. :notworthy:
From what you said to me you do owe him big time bud lol
Post by: Deako on January 09, 2016, 08:35:45 pm
Post by: Deako on January 11, 2016, 04:32:24 pm
Fingers crossed no more hurdles and the car should perform on Wednesday!
Post by: DANBOY66 on January 11, 2016, 04:37:59 pm
Post by: Mitch H on January 11, 2016, 10:43:26 pm
What are your thoughts on them and the b8's? I'm looking at the same setup or possibly just h and r springs with new dampers as the bilsteinsa are pricey although I'm sure they're quality
Post by: Deako on January 12, 2016, 07:28:31 pm
Lovely car mate! Your h and r springs the 30mm ones?
What are your thoughts on them and the b8's? I'm looking at the same setup or possibly just h and r springs with new dampers as the bilsteinsa are pricey although I'm sure they're quality
It's a great setup. Don't buy the Bilsteins from the UK. You can get them half as cheap from Germany on eBay. :happy2:
Post by: Mitch H on January 12, 2016, 09:05:16 pm
Lovely car mate! Your h and r springs the 30mm ones?
What are your thoughts on them and the b8's? I'm looking at the same setup or possibly just h and r springs with new dampers as the bilsteinsa are pricey although I'm sure they're quality
It's a great setup. Don't buy the Bilsteins from the UK. You can get them half as cheap from Germany on eBay. :happy2:
I was gunna go for 50mm springs but I think it will be too low as I run 15mm spacers on front to clear brakes
thanks for heads up (Y)
Post by: Deako on January 13, 2016, 07:47:10 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F88A5C6A1-F859-4E4F-B631-045B4189EF10_zpsqbjqw2zi.jpg&hash=fceee7941578af178a7f37cb8f97758fdc43d28e)
:driver:
Post by: GrayMK5GTI on January 13, 2016, 09:01:28 pm
The old graph looks terrible :sick: - and the new Stage 2+ looks spot on :drinking: you must be happy with the way it goes?
Post by: Deako on January 13, 2016, 09:10:58 pm
Saw the chat on "TFSI Tuning" Facebook page :happy2:
The old graph looks terrible :sick: - and the new Stage 2+ looks spot on :drinking: you must be happy with the way it goes?
Yes. It's immense. Shame it's rained since I left R-Tech.
In all fairness, the stage 1 map wasn't suited for all my stage 2+ mods.
Post by: AJP on January 13, 2016, 09:12:11 pm
Great results, again.
Post by: Mitch H on January 14, 2016, 05:56:01 pm
Post by: Shoduchi on January 14, 2016, 06:22:37 pm
Post by: rdfcpete on January 14, 2016, 06:25:17 pm
Results from today.
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F88A5C6A1-F859-4E4F-B631-045B4189EF10_zpsqbjqw2zi.jpg&hash=fceee7941578af178a7f37cb8f97758fdc43d28e)
:driver:
:driver: Glorious stuff Luke :party: :party:
Those dry days are only 4 months away, who doesn't love a winter map? :grin: :laugh:
Post by: Deako on January 14, 2016, 06:27:03 pm
Post by: MC71 on January 15, 2016, 08:08:04 pm
Had a quick skip through your thread..........which clutch/flywheel combo did you go for, holding that torque well is it?
Had my Organic Helix (with OEM DMF) mapped by Niki a few years ago to 420ft lb but that was at the edge of its ability and was bought back to 370.
Post by: Deako on January 15, 2016, 08:11:34 pm
I went for the Sachs Race Sintered Paddle and SMF. Rated to around 450lb ft I think. :happy2:
Post by: Deako on January 21, 2016, 11:37:29 am
Post by: patpong_pete on January 22, 2016, 12:42:50 am
So it was MOT time this last week. Couldn't get booked in until Monday. Passed with flying colours of course. :wink:passed with Decat ?
£££
Post by: gym kid on January 24, 2016, 10:22:18 am
Post by: Deako on January 24, 2016, 12:49:30 pm
Post by: Deako on February 01, 2016, 08:24:22 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FD044A748-E9C3-449D-B742-2E53380401B8_zpsganjoimk.jpg&hash=ad8292f799e01855184d371e656c49a8cb873e93)
Post by: samiul11 on February 01, 2016, 08:30:17 pm
Post by: Mitch H on February 01, 2016, 09:36:34 pm
Post by: Deako on February 01, 2016, 09:37:25 pm
Do you have to do any coding to get the mk6 controls working or are they just plug and play with the different surround ?
1 wire swap, then new surround and plug and play.
Post by: Mitch H on February 01, 2016, 09:40:04 pm
Do you have to do any coding to get the mk6 controls working or are they just plug and play with the different surround ?
1 wire swap, then new surround and plug and play.
Ah sweet! How much mk6 controls go for? Added it to my list!
Post by: Deako on February 01, 2016, 10:04:00 pm
Do you have to do any coding to get the mk6 controls working or are they just plug and play with the different surround ?
1 wire swap, then new surround and plug and play.
Ah sweet! How much mk6 controls go for? Added it to my list!
I'm selling a spare set for £45 inc AQS
Post by: Deako on February 02, 2016, 12:40:07 am
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F5DF25BF0-614A-42B8-B15D-8A2A1E14E189_zpsahqcilr1.jpg&hash=d0b7cb41129ae26d72e8224269dc9dd410dbb1ad)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F10709482-E7C5-4B99-ABFA-040572EE1C37_zpsvrfiqzg9.jpg&hash=53541c427e3082194c0f091eeb93646280e719fc)
Just waiting for them to finish refurbishing the front and rear 2 piece discs. :jumpmove:
Post by: dansmith180 on February 02, 2016, 08:44:55 am
Although knowing BCR I wouldn't be that hopeful of deadlines :innocent:
Post by: Shoduchi on February 02, 2016, 10:02:40 am
Post by: lukemk5gti on February 02, 2016, 10:12:37 am
Mk7 GTI Gear knob!!
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FF6C00829-9CFB-4994-A00B-60B1B92101A9_zpsqziluglx.jpg&hash=4d185dfb3bd35b3a5bfacfd4f019cb61901f306d)
Amazing car! Where did you pick up the mk7 gear knob? VW parts dept?
Post by: Deako on February 02, 2016, 10:56:31 am
The Mk7 GTI knob was purchased from eBay in South America. :wink:
Post by: lukemk5gti on February 02, 2016, 11:33:24 am
Looks like the same one for €184, that sound about right to you? Is it a simple plug and play switch over from standard?
http://www.ebay.ie/itm/VW-Golf-7-Knob-Shift-Gear-Knob-6-Speed-Golf-VII-5G-GTI-R-Red-stitching-GENUINE-/281162939011?hash=item41769dfa83:g:Eu0AAMXQxKxSAeK7
Post by: Deako on February 02, 2016, 02:36:23 pm
Post by: lukemk5gti on February 02, 2016, 03:51:56 pm
Nope. It's definitely not plug and play. You have to swap the lower frames over, cut a couple of inches from your original gear knob.
Figured!! I did it on another VW and it was a pain... Thanks @Deako (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=653)
Post by: TAPPY on February 02, 2016, 06:55:30 pm
Post by: Deako on February 02, 2016, 06:58:33 pm
Have you received those bolts mate?
@TAPPY (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=9938) Yes. Thanks. Absolute star!! :happy2:
Post by: TAPPY on February 02, 2016, 10:06:50 pm
Post by: Deako on February 09, 2016, 04:57:33 pm
Post by: Shoduchi on February 09, 2016, 05:19:36 pm
Fitting bolt on brakes isn't that hard but you'd still need to bed in the pads before going to the track, I think. :confused:
Post by: xjay1337 on February 09, 2016, 05:55:38 pm
Brakes are the no1 factor on the track day that fail / cause lack of enjoyment.
takes a couple of hours to fit i'm sure you can find the time... :happy2:
Post by: xjay1337 on February 09, 2016, 06:00:22 pm
Nope. It's definitely not plug and play. You have to swap the lower frames over, cut a couple of inches from your original gear knob.
It is plug and play . :happy2:
i was one of the first to fit a mk7 gearknob back in 2014 :happy2:
drill into the gearknob from the bottom up . can't remember the size bit you need.. whatever the size of the shifter shaft was (easy to find with ring spanner)
simply remove stock one. unstaple mk7 leather from mk7 base
restaple mk7 leather onto mk5/6 base or use araldite just make sure you have got the leather pulled nicely.
drill up through gearknob enough to get the shifter in the correct position
tighten up clip and secure the base :happy2: :happy2:
saves ruining your oem components which are more fiddly to change :pomppomp:
Post by: Deako on February 09, 2016, 08:01:52 pm
Nope. It's definitely not plug and play. You have to swap the lower frames over, cut a couple of inches from your original gear knob.
It is plug and play . :happy2:
i was one of the first to fit a mk7 gearknob back in 2014 :happy2:
drill into the gearknob from the bottom up . can't remember the size bit you need.. whatever the size of the shifter shaft was (easy to find with ring spanner)
simply remove stock one. unstaple mk7 leather from mk7 base
restaple mk7 leather onto mk5/6 base or use araldite just make sure you have got the leather pulled nicely.
drill up through gearknob enough to get the shifter in the correct position
tighten up clip and secure the base :happy2: :happy2:
saves ruining your oem components which are more fiddly to change :pomppomp:
Sure. Perfectly plug and play! :wink:
Cutting down your original shaft, unstapling and glueing onto the old frame etc.
I'm not saying it's hard. It wasn't. But it's not plug and play.
Post by: Deako on February 09, 2016, 08:02:29 pm
Find time to do your brakes or you may as well not bother going on your trackday from my experiences.
Brakes are the no1 factor on the track day that fail / cause lack of enjoyment.
takes a couple of hours to fit i'm sure you can find the time... :happy2:
I know. Made it clear since I dropped them off at the start or January that I needed them back before this track day. I've done a few in my time.
Post by: xjay1337 on February 10, 2016, 12:06:46 am
Nope. It's definitely not plug and play. You have to swap the lower frames over, cut a couple of inches from your original gear knob.
It is plug and play . :happy2:
i was one of the first to fit a mk7 gearknob back in 2014 :happy2:
drill into the gearknob from the bottom up . can't remember the size bit you need.. whatever the size of the shifter shaft was (easy to find with ring spanner)
simply remove stock one. unstaple mk7 leather from mk7 base
restaple mk7 leather onto mk5/6 base or use araldite just make sure you have got the leather pulled nicely.
drill up through gearknob enough to get the shifter in the correct position
tighten up clip and secure the base :happy2: :happy2:
saves ruining your oem components which are more fiddly to change :pomppomp:
Sure. Perfectly plug and play! :wink:
Cutting down your original shaft, unstapling and glueing onto the old frame etc.
I'm not saying it's hard. It wasn't. But it's not plug and play.
You dont need to cut your old shaft. I suggested already. Drill into the bottom of new gearknob :-)
Much easier
Ok plug and play aside from a drill :) just suggesting a different way for luke to try it
Post by: lukemk5gti on February 10, 2016, 08:59:00 am
@xjay1337 (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=7542) I did actually see it in your thread... Looks much nicer to the original! I have the eBay ad saved so I'm watching the price!Nope. It's definitely not plug and play. You have to swap the lower frames over, cut a couple of inches from your original gear knob.
It is plug and play . :happy2:
i was one of the first to fit a mk7 gearknob back in 2014 :happy2:
drill into the gearknob from the bottom up . can't remember the size bit you need.. whatever the size of the shifter shaft was (easy to find with ring spanner)
simply remove stock one. unstaple mk7 leather from mk7 base
restaple mk7 leather onto mk5/6 base or use araldite just make sure you have got the leather pulled nicely.
drill up through gearknob enough to get the shifter in the correct position
tighten up clip and secure the base :happy2: :happy2:
saves ruining your oem components which are more fiddly to change :pomppomp:
Sure. Perfectly plug and play! :wink:
Cutting down your original shaft, unstapling and glueing onto the old frame etc.
I'm not saying it's hard. It wasn't. But it's not plug and play.
You dont need to cut your old shaft. I suggested already. Drill into the bottom of new gearknob :-)
Much easier
Ok plug and play aside from a drill :) just suggesting a different way for luke to try it
Post by: Deako on February 10, 2016, 12:37:43 pm
Post by: xjay1337 on February 10, 2016, 02:11:42 pm
in order to help my friend fit his one, i took mine off , and wasn't able to tighten the clip up properly using the pliars i had, so does rotate with a bit of pressure now. but was fine before i touched it again . once tightend up it will be fine :signLOL: :signLOL:
just another way of doing it if you want to be able to return the car to standard easily.
Post by: Deako on June 03, 2016, 08:23:14 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FD4904E7D-88E8-49F3-9A75-059DF662C0C8_zpsvm0tfxsw.jpg&hash=5eb2b62a17953e7aa2d44330c9f3b23fd4d9ea9b)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FC05F7C14-2842-47AD-A1FB-2075D5751DE2_zpssrawfdpn.jpg&hash=5e3afb1ff13e8a7456d47a4120f95e708c7f2287)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F7A357C11-2707-4E17-A93C-47EBB56ABEDB_zpspfoiufs2.jpg&hash=86ef07ecf453dce74d2e52a49a13801d0098a645)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FBDEA468A-3BA9-4270-9DC3-70C6024CD184_zpsssdiafv1.jpg&hash=434e809c3acadf24d2e65d08492fee56d0f0da98)
Post by: Deako on June 03, 2016, 08:26:53 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F10061ACE-1B81-41A6-BB9F-9982360BDE20_zpslzljdzgl.jpg&hash=33e3903e3a7914ddfb8144274937af145641cce2)
Post by: dansmith180 on June 03, 2016, 08:44:03 pm
Post by: Rob. on June 04, 2016, 10:26:14 am
Just flicked through the thread and couldn't see any.
Post by: Deako on June 04, 2016, 09:43:29 pm
Post by: Rob. on June 04, 2016, 11:44:22 pm
Did you go for the 8"/4"/tweeter set? How do they sound running off the head unit?
Post by: Deako on June 05, 2016, 04:22:11 pm
Post by: Deako on June 06, 2016, 11:52:09 am
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FA4011598-CF9B-4103-BF16-735DBF898F5E_zps3eghnk1z.jpg&hash=ad991b00313434df71b7462546eecde962ef81ef)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F91E12246-716C-49F1-B834-B6B9D0AF818A_zpsp2xvwzzo.jpg&hash=605034d4134a7b04fdceaccdba913cc39d51c987)
Post by: Shoduchi on June 06, 2016, 12:05:19 pm
Post by: Deako on June 06, 2016, 12:06:53 pm
The new brakes will look awesome with the rest of the car. You can also think in the future of fitting the R32/S3 rear brakes to balance the braking power. Ordering TRW new parts from ebay or online stores isn't that expensive. :smiley:
I did have a full setup of VWR 6pot fronts and S3 rears. All refurbished by BCR with 2 piece discs. But sold it all to @M4T VW (http://www.mk5golfgti.co.uk/forum/index.php?action=profile;u=5017)
Post by: Shoduchi on June 06, 2016, 12:13:17 pm
Post by: xjay1337 on June 06, 2016, 08:15:28 pm
They're the same as the pp brakes so wondering why you've downgraded from 6 pots lol.
Can never have too much brake.
Post by: Mitch H on June 06, 2016, 08:19:32 pm
Couple of pics from yesterday:
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2FA4011598-CF9B-4103-BF16-735DBF898F5E_zps3eghnk1z.jpg&hash=ad991b00313434df71b7462546eecde962ef81ef)
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fg196%2FLukeDeakin%2F91E12246-716C-49F1-B834-B6B9D0AF818A_zpsp2xvwzzo.jpg&hash=605034d4134a7b04fdceaccdba913cc39d51c987)
Looks mint what wheels are they? 1.3s?
Post by: Deako on June 06, 2016, 08:44:49 pm
Post by: pablo_the_dogg on June 07, 2016, 08:55:22 pm
Post by: KieranM on June 07, 2016, 09:41:46 pm
Post by: Deako on June 07, 2016, 09:45:20 pm
Been looking at getting these seats myself, how do you find them? And how come you decided to downgrade the brakes?
In all fairness I was thinking of selling the car and emigrating.
Seats are great VFM.
Post by: Paradox1 on July 22, 2016, 11:46:05 am
Car looks even better in person. whats next?
Post by: Deako on July 22, 2016, 11:49:20 am
Really not sure. Money tree has run out of leaves at the moment.
Post by: Tfsi_Mike on July 22, 2016, 06:19:19 pm
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fss28%2FClint_042%2FIMG_3814.jpg&hash=40085b32aba84f45b7d9c4c3c07603ed83353db8)
Post by: rdfcpete on July 22, 2016, 07:22:12 pm
There must be some kind of issue :wink: [ERROR]
You must've been traveling or something man! :happy2:
Post by: Deako on July 22, 2016, 07:24:04 pm
I cover more mileage than I should be.
Post by: vwgolfgtimk5 on July 30, 2016, 05:11:32 pm