MK5 Golf GTI

All Things Mk5 => Mk5 General Area => Topic started by: Vwgtiking on December 07, 2015, 12:12:40 pm

Title: PN request
Post by: Vwgtiking on December 07, 2015, 12:12:40 pm

Part number pls for the oem can follower.

Title: Re: PN request
Post by: ed30Lewis on December 07, 2015, 12:17:17 pm

06D 109 309 C

Title: Re: PN request
Post by: Vwgtiking on December 07, 2015, 12:24:30 pm

Ty

Title: Re: PN request
Post by: Vwgtiking on December 08, 2015, 06:41:52 pm

Pls can I have another for the studs that hold the engine cover in place

(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fimages.tapatalk-cdn.com%2F15%2F12%2F08%2Fc8cf99760432f53132a1ad1f8c558e1f.jpg&hash=871f74cda6608b34d239952ac8fda55345c0c7dc)

Title: Re: PN request
Post by: galaxie500 on December 08, 2015, 07:10:29 pm

Pretty sure its:

WHT 000 898

Named as 'Ball Joint' on ETKA for some reason.  I replaced a couple of mine a few years ago and you'll need a 24mm 12 point wrench too - the base is usually very tight.  Good luck!

Title: PN request
Post by: Vwgtiking on December 08, 2015, 09:06:38 pm

Ty! Some on eBay £10 each! Lol. Will try and find someone on fb breaking a gti.