MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: Lewo on February 12, 2016, 12:59:18 pm
-
In preparation for getting a stage 1 map done at R-Tech I want to play safe and get PCV & DV done by them at the same time but want to change the cam follower before the drive up there. I'll check the service history but pretty sure it's not been done before.
Not something I can do so what's the book time a garage would charge and what else is involved?
Cheers.
-
Depending on the garage, half to one hour labour.
-
I'll do it for £50 :ashamed: :signLOL:
-
I'll do it for £50 :ashamed: :signLOL:
Haha, £45 and as much tea as I can drink :jumpmove: :jumpmove:
-
You're both more than kind thanks :smiley: :happy2:
I'll ask a couple of local places to see if they can help out.
Reckon the main dealers will charge £50-100 labour if it is 1/2-1 hour.
I'm in Kent if anyone is available..... :laugh:
-
I'll do it for £50 :ashamed: :signLOL:
Haha, £45 and as much tea as I can drink :jumpmove: :jumpmove:
oi stop it as I offered first :signLOL: :drinking: :fighting2:
-
Banjo bolt? if not £40 :laugh:
-
Banjo bolt? if not £40 :laugh:
Not another one :fighting2: :signLOL:
-
At this rate we will be paying him to do it ! :jumpmove: :pomppomp:
-
Its 3 bolts and a nut.... dead easy to do
-
At this rate we will be paying him to do it ! :jumpmove: :pomppomp:
lmso :signLOL:
-
Its 3 bolts and a nut.... dead easy to do
If you have the right tools and knowhow, I have neither :smiley:
I've seen the vid on one of the other threads though.
-
I tried to do this today! I need a proper tool for the banjo bolt! so ended up putting everything back together.
Anybody wanna help me out doing it? East London here...
-
I tried to do this today! I need a proper tool for the banjo bolt! so ended up putting everything back together.
Anybody wanna help me out doing it? East London here...
Where in east London you at?.
-
Had mine done as part of a general service yesterday, about £50-60 of my final bill including part.
-
I tried to do this today! I need a proper tool for the banjo bolt! so ended up putting everything back together.
Anybody wanna help me out doing it? East London here...
You need an m8 triple spline. I bought a set of them if ebay for abour 15 quid. Ive used them since then aswell for other things
-
Had mine done as part of a general service yesterday, about £50-60 of my final bill including part.
Was that main dealer or independent?