MK5 Golf GTI
All Things Mk5 => Mk5 General Area => Topic started by: K9 on March 08, 2016, 08:31:16 pm
-
Been searching for a diy to remove oem Dp k03 gto dsg mk5. But couldn't find any good with pics. Anyone any help here?
Skickat från min SM-G900F via Tapatalk
-
Not the specific pics your after but here's where it sits in the engine bay
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fthedriver16%2FMobile_Uploads%2FDB6DD695-A04B-4DEC-BB5C-E2E65FAE8DE1.jpg&hash=6e1d6211d92285ea59cbfe97d44719cbbebe949d)
That's where it bolts to
(https://www.mk5golfgti.co.uk/forum/proxy.php?request=http%3A%2F%2Fdaz.co%2Fmedia%2Fthedriver16%2FMobile_Uploads%2F3EABBFA8-5E01-4B27-9552-37AF9479074A.jpg&hash=6dd49938f6d668d7444c4a38025969c8752d6d09)
Not a bad job to do. Get it on some decent ramps, remove engine cover and spray the bolts with wd40 as they can be quiet tight.
A decent socket set with mixed extensions bars and a some spanners and it should come off easy enough
-
I removed my audi tt one and that was a bugger so this should be a doddle :slap:
-
Could this help?
-
A car lift and garage will be used. What about unplugging the lqmbdas?
Skickat från min SM-G900F via Tapatalk