MK5 Golf GTI
All Things Mk5 => How to Guides / Troubleshooting => Topic started by: glasgowdubber on March 10, 2016, 08:12:56 am
-
Passenger, & 2 Rear (5dr)
I've read many posts regarding this, however none relating to the actual grab handles themselves. I'm trying to replace all grab handles, trim, and switches in my car. I've managed to successfully do the drivers side, however I've unclipped the outer trim from the front passenger, removed 2 T27 screws, however I can feel screws, screwed in from the opposite side.
Do I really need to remove the full door card to replace these?
-
Yep door card off job :grin:
-
Yep door card off job :grin:
:slap: I was hoping I wouldn't get this reply :thinking: :fighting:
-
Its not to bad but frustrating when the drives is so straigh forward and the fact you only have to undo one screw from the other side.
-
Its not to bad but frustrating when the drives is so straigh forward and the fact you only have to undo one screw from the other side.
I know what you mean! Is it a T20 & T30 I need? Anything else?
-
Its not to bad but frustrating when the drives is so straigh forward and the fact you only have to undo one screw from the other side.
I did mine on Monday & there were 2 screws to remove on the inside.
-
https://m.youtube.com/watch?v=f3dpFzU7hwc I found this on YouTube was particularly helpful. Even tells you how to get those pesky clips out too.